Reversible cutting plate carbide WNMG (medium machining)
Universal ISO P-M-K-S medium finishing WN
INDEXAINRT-WNMG080404-VM-HP5300
Register now and access more than 125,000 products
- Reduced cutting load thanks to soft-cutting geometry
- Excellent chip control
- Excellent PVD coating technology with high hardness and oxidation resistance for extended service life
Datasheets(X)
Longitudinal turning and face turning for higher infeed
Material to be processed | Steel |
Supply type | Medium finishing |
Material | Carbide |
ISO-Code Rotating | WNMG 080404 |
Chip breaker code | VM |
Carbide type ISO | P35 |
Carbide type | HP5300 |
Machining conditions for indexable insert | Unfavourable |
Shape of indexable insert ISO | Trigon 80° |
Clearance angle of indexable insert ISO | N (0°) |
Tolerance class of indexable insert ISO | M |
Indexable insert type ISO | Type G (with hole, cylindrical, double-sided chip breaker) |
Size of indexable insert ISO | 08 |
Thickness of indexable insert ISO | 04 |
Corner radius of indexable insert ISO | 04 |
Coating | PVD |
Carbide type area ISO | P |
Materials group | P (primary application) |
min./max. ap | 0.9-5 mm |
f min./max. | 0.05-0.3 mm/r |
Min./max. Vc in steel | 80-250 m/min |
Min./max. Vc in stainless steel | 80-190 m/min |
Min./max. Vc in cast iron | 75-140 m/min |
Vc in heat resistant alloys min./max. | 20-60 m/min |
Last viewed
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Hexagonal bolt with shank ISO 4014, steel 8.8, zinc-nickel-plated, silver (ZNSHL)
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Safety boots, S2
1/2" socket wrench insert Triple square, short
Pan head tapping screw with flange
Blind rivet, flat head
EPS profile thumbturn cylinder
Sealing plug GPN 300 F Polyethylene (PE-LD), natural
Hexagonal nut, low profile ISO 4035 steel 04, zinc-nickel-plated silver (ZNSHL)