Ridge and hip roll WÜTOP® Uni-Roll
WÜTOP ridge and arris roll, Uni Roll
RIDGROLL-(UNI-ROLL)-ANTHRACITE-0,3X20M
Register now and access more than 125,000 products
- UV-stabilised and non-rotting PVC with aluminium sealing strips along sides
- Rounded edges prevent hand injuries
- Extremely flexible and easy to install
- Butyl rubber with excellent adhesive strength
- Ventilation cross-section in line with DIN 4108: approx. 160 cm2, sufficient for approx. 16 m rafter length.
Conduct your own adhesion tests on tiles with thick silicone coatings
Datasheets(X)
- The substrate must be clean, dry and free from dust and grease.
- WÜTOP Uni Roll is rolled out and tacked or nailed centrally on the ridge and hip batten
- Peel the protective film off the adhesive strip, simultaneously press the adhesive on both sides firmly onto the top row of roof covering and smooth down into the trough
- WÜTOP Uni Roll can be cut using standard scissors.
Colour | Anthracite |
Length of roll | 10 m |
Roll width | 300 mm |
Number of rolls | 2 PCS |
Ventilation cross section | 160 cm² |
Min. processing temperature | 5 °C |
Last viewed
Connector, pneumatic
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
HSCo8 end mill, short, centre-cutting DIN 844K
EPS profile double cylinder
pias® drilling screw, flat head with AW drive
Frame Nova Pro Scala H122 For H122 drawers
Heat S3 safety shoes
Hexagon nut, low profile with fine thread
A 502 window handle
Hexagon nut, low profile with fine thread ISO 8675, steel 5, plain