Ring bolt, CE
Ring bolt steel CE
SREW-RING-W-KEY-CE-360G-0,75T-M14X18
Register now and access more than 125,000 products
- Safety factor 4 in all load directions
- Ideal as a 90° anchor point
- Can be rotated 360°
- Captive screw
- Painted
The ring bolt must always be fully screwed onto the component. With axial tension, a deviation of +/-5° with a reduction in load capacity by 10 % is permitted. Anchor point not suitable for rotating under load.
- Suitable for secure raising of loads according to Machinery Directive 2006/42/EC
- Designed for an effect of action of 20,000 stresses
Datasheets(X)
 | |
Max. load-carrying capacity | 0.75 t |
Material | Steel |
Surface | Lacquered |
Thread type x nominal diameter (d1) | M14 |
Thread length (metric thread) (l1) | 18 mm |
Height (h1) | 47 mm |
Ring height (b1) | 11 mm |
Ring thickness (s1) | 10 mm |
Internal diameter (d2) | 30 mm |
Outer diameter (d3) | 52 mm |
Diameter of contact surface (d4) | 32 mm |
Max. torque | 100 Nm |
Product weight (per item) | 200 g |
Last viewed
Exhaust assembly paste
Work jacket
Low-cut safety shoe S3
Work jacket
VARIFIX® rail connectors For 41/128 double profile
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, metric male thread with seal
Hexagonal nut, 3xd high WN 6334 steel 6, zinc-plated, blue passivated (A2K)
S1PL safety shoe Uvex1 x-craft pro
Stud with threaded end ≈ 1.25 d
Straight reducer fitting ISO 8434-1, stainless steel 1.4571