Ring bolt, CE
Ring bolt steel CE
SREW-RING-W-KEY-CE-360G-2,3T-M20X30
Register now and access more than 125,000 products
- Safety factor 4 in all load directions
- Ideal as a 90° anchor point
- Can be rotated 360°
- Captive screw
- Painted
The ring bolt must always be fully screwed onto the component. With axial tension, a deviation of +/-5° with a reduction in load capacity by 10 % is permitted. Anchor point not suitable for rotating under load.
- Suitable for secure raising of loads according to Machinery Directive 2006/42/EC
- Designed for an effect of action of 20,000 stresses
Datasheets(X)
 | |
Max. load-carrying capacity | 2.3 t |
Material | Steel |
Surface | Lacquered |
Thread type x nominal diameter (d1) | M20 |
Thread length (metric thread) (l1) | 30 mm |
Height (h1) | 63 mm |
Ring height (b1) | 15 mm |
Ring thickness (s1) | 16 mm |
Internal diameter (d2) | 40 mm |
Outer diameter (d3) | 70 mm |
Diameter of contact surface (d4) | 47 mm |
Max. torque | 170 Nm |
Product weight (per item) | 600 g |
Last viewed
Work dungarees
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
90° push-in elbow For Alu-Steck-WES aluminium pipe
Work jacket
Two-hand angle grinder EWS 24-230
Hexagonal bolt
Replacement blade
Ducting clamp Part 1 – Light series
Spring toggle type W-FKW with centring plug
Split pin ISO 1234 A2 stainless steel