Ring grommet
Ring eyelet w. single weld-on basis with spring
RG-EYE-SINGLE-WELD-W.SPG-Z-D45
Register now and access more than 125,000 products
- Weldable ring block with individual welding base for lashing loads
- Safety factor 2
- Ring lug crack tested to 100%
- Painted in RAL 9005
Only suitable for lashing, not for lifting loads and/or persons. In the case of special applications, it is advised to determine the load-bearing capacity to be used depending on the tension angle of inclination.
The standard specifications to be observed when selecting and attaching the ring trestle: EN 12640, EN 75410, EN12195/1
Datasheets(X)
CAD data (available after login)
 | |
Permissible tensile force when pulled straight | 5000 daN |
Ring thickness (s1) | 16 mm |
Ring height (b2) | 18 mm |
Thickness (b3) | 34.5 mm |
Internal diameter (d1) | 45 mm |
Body height (h2) | 27 mm |
Length (l1) | 91 mm |
Width (b1) | 77 mm |
Welding seam thickness (HV+∆a) | HV 7+3 |
Product weight (per item) | 65.000 g |
Last viewed
Paint retouching pen
Japanese hand saw Douzuki
Hexagonal bolt with thread up to the head DIN 933, A4 stainless steel, plain
Fire protection duct outer corner I30/I60/I90/I120
Wire feed roller For MM 350 welding systems
Hexagonal bolt with thread up to head
1/2-inch socket wrench insert, TX head For external TX screws, short
ALW diversion bracket for JB-DK window installation brackets
Screw-in part, tapered sealing EN1254, red brass, 4380
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain