Ring-shaped crimp cable lug DIN 46234 and similar
Crimp cable lug
CRMPCBLUG-46234-CU-(J2N)-M10-150,0SMM
Register now and access more than 125,000 products
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
CAD data (available after login)
For multi-wire, fine-wire and very fine wire copper conductors, such as compliant with DIN EN 60228 Class 2, 5 and 6
 | |
Wire cross section | 150 mm² |
Flange hole | M10 |
Nominal size | 10 - 150 |
Wire diameter (d1) | 19 mm |
Diameter of hole (d2) | 10.5 mm |
Distance between sleeve end and centre of hole (l) | 50 mm |
Sleeve length | 24 mm |
Width (b) | 30 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Hexagon head bolt with full thread for pressure container construction (PED) ISO 4017, steel 25CrMo4, plain
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, A2 stainless steel, shape C (with tip)
Safety boots S3
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
EasyClick furniture hinge With integrated damping and automatic closing
Wood screw, DIN 95 brass Raised countersunk head, slotted
Twist drill bit assortment HSCo DIN 338 type RN bronze-tipped 19 pcs
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Rear impact wrench holder For workshop trolleys
Half-shell hexagon crimping insert