Ring-shaped crimp cable lug DIN 46234 and similar
Crimp cable lug
CRMPCBLUG-46234-CU-(J2N)-M16-150,0SMM
Register now and access more than 125,000 products
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
CAD data (available after login)
For multi-wire, fine-wire and very fine wire copper conductors, such as compliant with DIN EN 60228 Class 2, 5 and 6
 | |
Wire cross section | 150 mm² |
Flange hole | M16 |
Nominal size | 16 - 150 |
Wire diameter (d1) | 19.0 mm |
Diameter of hole (d2) | 17.0 mm |
Distance between sleeve end and centre of hole (l) | 50 mm |
Sleeve length | 24 mm |
Width (b) | 30 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Raised countersunk tapping screw, C shape with Z recessed head DIN 7983, A2 stainless steel, plain, shape C, with Z cross recess.
Hexagon nut with clamping piece (all-metal) ISO 7042, steel 8, zinc-plated, thick-film passivated (VZD)
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
Hexagonal bolt with thread up to the head
Plus Quadro-L Vario hammer drill bit
Eye bolt DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape B
90° angled cutting ring fitting ISO 8434-1, zinc-nickel-plated steel
Hexagonal bolt
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
HSCo keyway cutter DIN 850D