Rivet nut with countersunk head
Countersunk head aluminium open
NUT-RIV-CS-ALU-(1,5-4,5)-9X17-M6
Register now and access more than 125,000 products
The specified values are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
 | |
Material | Aluminium |
Surface | Plain |
Thread type x nominal diameter (D) | M6 |
Head diameter (d1) | 11.5 mm |
Outer diameter (d2) | 9.0 mm |
Length (l1) | 16 mm |
Head height (k1) | 1.5 mm |
Min./max. grip range (s1) | 1.5-4.5 mm |
Head type | Countersunk head |
Tensile fracture load | 6700 N |
Max. tightening torque | 6 Nm |
Last viewed
Brake cylinder rubber grease
S1P safety shoes Base B1015A
Machine tap For W.TEC® INSERT COIL helical inserts - made of HSCo; shape B
Hexagonal bolt, with thread to head and fine thread
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Multigrade compressor oil Pro
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
VLB 200 3D door hinge
LED hand-held spotlight, rechargeable, WLHS 2
ASSY® D
plug screw Pan head, without drill tip