Rivet nut with countersunk head and knurled shank
Countersunk head aluminium knurled shank open
NUT-RIV-CS-ALU-(1,5-4,0)-5,9X12,5-M4
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Aluminium |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M4 |
Length (l1) | 12.5 mm |
Head diameter (d1) | 8.5 mm |
Outer diameter (d2) | 5.9 mm |
Head height (k1) | 1.5 mm |
Min./max. grip range (s1) | 1.5-4.0 mm |
Tensile fracture load | 2840 N |
Shear-fracture load | 1070 N |
Max. tightening torque | 4 Nm |
Drill hole diameter | 6.0 mm |
Shank detail | With knurled shank |
Head type | Countersunk head |
Last viewed
ASSY® D
plug screw Countersunk head
Pliers For shaft circlips, DIN 5254
Hexagonal bolt with shank DIN 931, steel 10.9, zinc-plated, blue passivated (A2K)
Sealing ring, vulcanised fibre, shape A
Brush belt, medium
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Board markers – coloured pens for writing on a whiteboard
5/8" inch wall holder For rotary laser level and multi-line laser
VARIFIX® profile foot 41/128 For double profiles
Sandpaper strip Useit® Superpad wood