Rivet nut with countersunk head and knurled shank
Countersunk head aluminium knurled shank open
NUT-RIV-CS-ALU-(1,5-4,0)-6,9X13,5-M5
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Aluminium |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M5 |
Length (l1) | 13.5 mm |
Head diameter (d1) | 9.5 mm |
Outer diameter (d2) | 6.9 mm |
Head height (k1) | 1.5 mm |
Min./max. grip range (s1) | 1.5-4.0 mm |
Tensile fracture load | 4900 N |
Shear-fracture load | 1170 N |
Max. tightening torque | 5 Nm |
Drill hole diameter | 7 mm |
Shank detail | With knurled shank |
Head type | Countersunk head |
Last viewed
Work jacket Kübler pilot jacket 1357 5229
Ear plugs uvex x-fit Detec
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, plain
Set screw, hex socket and flat point inch
Pin punch With 2-component plastic handle
Cylindrical pin, hardened DIN 6325, steel, plain
Cylindrical pin, hardened DIN 6325, steel, plain
Hexagonal bolt with pin and small hexagon
Identification rings, PVC
1/2 inch impact socket wrench insert hexagon, metric, short