Rivet nut with countersunk head and knurled shank
Countersunk head aluminium knurled shank open
NUT-RIV-CS-ALU-(2,0-4,5)-11,9X21,0-M10
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Aluminium |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M10 |
Length (l1) | 21 mm |
Head diameter (d1) | 14.5 mm |
Outer diameter (d2) | 11.9 mm |
Head height (k1) | 1.7 mm |
Min./max. grip range (s1) | 2.0-4.5 mm |
Tensile fracture load | 21500 N |
Shear-fracture load | 3820 N |
Max. tightening torque | 20 Nm |
Drill hole diameter | 12 mm |
Shank detail | With knurled shank |
Head type | Countersunk head |
Last viewed
W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
Safety sandals, S1
Special system screw For push-in connector
ASSY® 4 RCS fittings screw Steel zinc plated full thread raised countersunk head
Multi-Tester Pro II LED two-pin voltage tester
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, metric male thread with seal
Connection adapter For Max hammer drill bits and core drill bits with a minimum diameter of 32 mm
Hexagon Socket Head Cap Screw
Lever riveter HNG 28 N
Twist drill bit HSCo DIN 345 Type RN