Rivet nut with countersunk head and knurled shank
Countersunk head aluminium knurled shank open
NUT-RIV-CS-ALU-(4,0-6,5)-6,9X16,0-M5
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Aluminium |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M5 |
Length (l1) | 16 mm |
Head diameter (d1) | 9.5 mm |
Outer diameter (d2) | 6.9 mm |
Head height (k1) | 1.5 mm |
Min./max. grip range (s1) | 4.0-6.5 mm |
Tensile fracture load | 4900 N |
Shear-fracture load | 1170 N |
Max. tightening torque | 5 Nm |
Drill hole diameter | 7.0 mm |
Shank detail | With knurled shank |
Head type | Countersunk head |
Last viewed
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
SMART STEP EU+ HSCo twist drill bit DIN 338
Wing-type drilling screw, countersunk milling head with AW drive SCT7
Countersunk and pan head screw assortment 1625 pieces in system case 4.4.1.
Concrete screw with hexagon head W-BS/S
Wire rope clamp DIN 741, zinc-plated steel
Built-in socket EST-1
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
Shoe accessories
Hexagonal bolt with shank and fine thread