Rivet nut with small countersunk head and knurled shank
Small countersunk head sst A2 knurled shank open
NUT-RIV-CS-A2-(0,5-3,0)-10,0X5,9-M4
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M4 |
Length (l1) | 10 mm |
Head diameter (d1) | 7 mm |
Outer diameter (d2) | 5.9 mm |
Head height (k1) | 0.9 mm |
Min./max. grip range (s1) | 0.5-3 mm |
Tensile fracture load | 6860 N |
Shear-fracture load | 2940 N |
Max. tightening torque | 9 Nm |
Drill hole diameter | 6 mm |
Shank detail | With knurled shank |
Head type | Countersunk head |
Last viewed
Wire cable cross clamp A4 stainless steel
Variable designer glass shelf support
Washer ISO 7090 steel 300 HV zinc-plated thick-film passivated with sealing (ZSM)
Concealed hinge, TIOMOS Impresso 110/30 A With integrated damping, three damping settings available
Large recycling bag
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Hexagonal bolt with thread up to head for pressure container construction ISO 4017, steel 5.6, plain
Slotted screwdriver with wooden handle
Brake line nipple, type L
WÜPOFAST® steel zinc-plated blue chipboard screw With combination slot