Rivet nut with small countersunk head and knurled shank
Small countersunk head sst A2 knurled shank open
NUT-RIV-CS-A2-(0,5-3,0)-14,0X8,9-M6
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M6 |
Length (l1) | 14 mm |
Head diameter (d1) | 10 mm |
Outer diameter (d2) | 8.9 mm |
Head height (k1) | 0.9 mm |
Min./max. grip range (s1) | 0.5-3 mm |
Tensile fracture load | 18620 N |
Shear-fracture load | 5230 N |
Max. tightening torque | 21 Nm |
Drill hole diameter | 9 mm |
Shank detail | With knurled shank |
Head type | Countersunk head |
Last viewed
Mains unit 24 V
Low-cut safety shoes, S1P
System insert, raster foam Pluck out the foam cubes to fit around items
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Feather key, low profile DIN 6885, steel, plain, shape A
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A2 stainless steel
Plastic expanding rivet with cap, with grooves
Arizona® Perfect soft vehicle dry abrasive paper For all paint repair work with intermediate and fine sanding
Coloured rubber grommets made from polychloroprene rubber Insulating grommets, coloured, CR
System insert 8.4.1, striking tool and files