Rivet nut with small countersunk head and knurled shank
Small countersunk head sst A2 knurled shank open
NUT-RIV-CS-A2-(0,8-3,5)-19,5X12,9-M10
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M10 |
Length (l1) | 19.5 mm |
Head diameter (d1) | 14.5 mm |
Outer diameter (d2) | 12.9 mm |
Head height (k1) | 1.1 mm |
Min./max. grip range (s1) | 0.8-3.5 mm |
Shear-fracture load | 5880 N |
Max. tightening torque | 32 Nm |
Drill hole diameter | 13 mm |
Shank detail | With knurled shank |
Head type | Small countersunk head |
Last viewed
Heat-shrink crimp connector push connector
Hexagonal cap nut, low profile DIN 917, A4 stainless steel, plain
Hexagonal bolt with shank ISO 4014, steel 10.9, phosphated
Hexagonal bolt with shank and fine thread DIN 960, steel 8.8, plain
Hexagonal bolt with thread up to head ISO 4017, steel strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
ASSY® 4 CSMP universal screw collated Steel zinc plated partial thread countersunk milling pocket head
Threaded sleeve For Stapa-Gewinde-WESF steel-armoured pipe
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, steel 4.8, plain
Mitre snips For straight and 45° cuts
GIS standard washbasin installation box 80 mm