Rolled hinge shape D wide
Rolled hinge wide, Shape D
CABHNGE-WIDE-(SHAPE-D)-ST-(ZN)-40X60
Register now and access more than 125,000 products
Delivery without fastening screws!
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
For small doors, boxes, cases, flaps, etc.
 | |
Type of assembly | Screw-on |
Material | Steel |
Length (A) | 40 mm |
Width (B) | 60 mm |
Roll diameter (R) | 5.7 mm |
Material thickness (M) | 1.2 mm |
Surface | Zinc plated |
Screw diameter | 3 mm |
Number of drill holes | 6 PCS |
Standards | DIN 7954 |
Last viewed
Flush milling cutter for wood With ball bearing
Low-cut safety shoes, S1
ISO insert holder with P clamping system for DN indexable inserts
Low-cut safety shoes, S2
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
ISO insert holder with D clamping system for DN indexable inserts
Hexagon socket set screw with ring cutter ISO 4029, A4 stainless steel, 21H, plain
EPS profile double cylinder
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Retaining pin For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems