Roller shutter system vertical installation box For top-mounted cabinets and wall cabinets
Roller shutter system, vertical box 20 mm louvres
FRNROLLSHTR-ALU-INOX-FIN-900/1500/20MM
Register now and access more than 125,000 products
- 20 mm slats
- Spring shaft for high-quality weight compensation
- Roller shutter runs, opens and closes very easily
- With 19-mm-thick side panels, the joints are 2.5 mm wide
- Material/surface: high-quality plastic and real aluminium components, coated with elegant aluminium banding in stainless steel look or aluminium surface
- Large element roller shutter
- Minimum installation depth 305 mm
- Roller shutter installation box
- Quick and easy installation
- Robust, minimal space requirements
Delivery time: approx. 10 working days
Specified dimensions not binding. Subject to technical changes!
Material | Plastic/aluminium |
Surface | Anodised |
Colour | Stainless steel coloured |
Fin width | 20 mm |
Cabinet width | 900 mm |
Min. cabinet height | 1000 mm |
Max. cabinet height | 1500 mm |
Installation depth | 305 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Safety boots, S2
Wire end ferrule with plastic sleeve box type 1 according to DIN 46228 Part 4
Nature work dungarees
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Ring bolt H.Q.E. with variable screw length
Tab locking plate For flush-closing doors
Solid carbide end mill Speedcut, ultra-hard steel 68 HRC, corner radius long, optional
EPS profile thumbturn cylinder
Rib disk
Stainless steel putty spreader set, 4 pieces
