Roof tile drill bit
MFD-S roof multi-purpose drill bit hexagon shank
DRL-GENPURP-ROOF-HEX-E-D4-L100-WL39MM
ZEBRA
Register now and access more than 125,000 products
Extremely hard
Even the hardest roof tiles are unable to hold out due to the special carbide panel with special geometry
Extremely accurate drilling
Precision-ground spiral grooves
Standardised 1/4-inch hexagonal shank
- No slippage in the drill chuck
- Suitable for any bit holder
- Observe rotation speed (approx. 600-1000 rpm)
- Increase the contact pressure for very hard materials
- Not suitable for impact drilling
Rotary drilling in roof tiles, Eternit, slate, ceramic, tiles, marble and granite. Specially designed for cordless drills.
Diameter (Ø) | 4 mm |
Length | 100 mm |
Working length | 39 mm |
Versatility (points system) | 2 of 4 points |
Service life (points system) | 4 of 4 points |
Drilling speed (point system) | 3 of 4 points |
Bore hole quality (point system) | 3 of 4 points |
Tool holding device | Hexagon |
Datasheets(X)
Last viewed
Hexagon Socket Head Cap Screw
Dry sandpaper disc Mirka Ultimax
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
Carrier rods without markers for SNAP marker
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HA shank
End caps set for REDOSLIDE Z40-G sliding door fitting sets
HSS Performance die For standard metric ISO thread
Concrete screw W-BS/S type ST-6 as a stair bolt With connecting thread
Key, high profile DIN 6885, stainless steel 1.4571, shape A
