Roofing screw EUROFAST® EDS-BZT
Steel zinc flake silver EUROFAST EDS-BZT drill tip
SCR-HEX-(EDS-BZT-48120)-4,8X120
Register now and access more than 125,000 products
- Non-slip
- For use with retaining plates, shape: D (deep = 4.85 mm non-slip), XH (XtraHigh)
Fastener length on
- Trapezoidal steel surface = roof structure + min. 20 mm / ETA
- Wooden surface = roof structure + min. 30 mm
- ETA-06/0007 approval
- Tested in accordance with DIN 50018 = 15 Kesternich cycles
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 120 mm |
Drill tip length (lp) | 5 mm |
Head diameter (dk) | 10.5 mm |
Head height (dk) | 4.3 mm |
Head type | Hexagon washer head |
Shape of tip | Drilling tip |
Thread design | Partial thread with underhead thread |
Thread length (tapping screw thread) (l2) | 75 mm |
Drive type | Outer hexagon |
External drive (s1) | WS8 |
Max. material thickness to be drilled through | 2 x 1.5 mm |
Material | Steel, case-hardened |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Approval | ETA-06/0007 |
Last viewed
Manual screw tap, assortment 3-piece Ruko hand tap cassette HSS DIN 352 Whitworth BSW 3 pieces
End cap set For REDOSLIDE Z60-HW/Z100-HW interior sliding door fitting
Label carrying system for identification rings
Replacement nozzles For pressure sprayers
EPS profile double cylinder
Dust extractor Plus
Cut-resistant glove Ejendals TEGERA® 7775
Cylindrical pin with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper), tolerance m6
Screwdriver set With hexagon shank and hex bolster for woodwork
Anvil secateurs