Roofing screw EUROFAST® EDS-SRB
EUROFAST EDS-SRB A4 sst. zp. w/ drill tip
SCR-CS-(EDS-SRB-48140)-4,8X140-BI-MET
Register now and access more than 125,000 products
- For use with retaining plates, shape: N (normal), D (deep), H (high), XH (XtraHigh), plastic funnel
- According to technical seal regulations, corrosion-resistant fasteners should be used in the event of refurbishment
Fastener length on
- Trapezoidal steel surface = roof structure + min. 20 mm / ETA
- Wooden surface = roof structure + min. 30 mm
- ETA-06/0007 approval
- Tested in accordance with DIN 50018 = 15 Kesternich cycles
Datasheets(X)
CAD data (available after login)
 | |
Material | Bimetal |
Surface | Zinc iron |
Head type | Pan head |
Shape of tip | Drilling tip |
Max. material thickness for steel | 2.5 mm |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 140 mm |
Head diameter (dk) | 9 mm |
Head height (k1) | 3.3 mm |
Internal drive | TX25 |
RoHS-compliant | Yes |
Suitable for use in the following materials | Steel |
Suitable for | Steel |
Approval | ETA-06/0007 |
Last viewed
Roll-in sliding block with guide bar
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-nickel-plated, silver (ZNSHL)
Conical countersink HSCo 90° with cross hole assortment, 4 pieces
Tapping screw, raised countersunk head
Work dungarees
Electronic labelling unit DYMO LabelManager 420P
Snap ring shape SW for shaft
Screw seal, self-centring
Work dungarees
HSCo8 end mill, short, centre-cutting DIN 844K