Roofing screw EUROFAST® Extra EDS-BZTHD
St. zinc flake, EUROFAST extra EDS-BZTHD drill tip
SCR-HEX-(EDS-BZTHD-48260)-4,8X260
Register now and access more than 125,000 products
For use with retaining plates, shape: D (D = 4.85 mm non-slip), XH (XtraHigh)
Fastener length on steel trapezoidal substrate = roof structure + min. 20 mm
- ETA-06/0007 approval
- Tested in accordance with DIN 50018 = 15 Kesternich cycles
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 260 mm |
Drill tip length (lp) | 6.25 mm |
Head diameter (dk) | 10.5 mm |
Head height (dk) | 4.25 mm |
Head type | Hexagon washer head |
Shape of tip | Drilling tip |
Thread design | Partial thread with underhead thread |
Thread length (tapping screw thread) (l2) | 120 mm |
Drive type | Outer hexagon |
External drive (s1) | WS8 |
Max. material thickness to be drilled through | 2 x 1.5 mm |
Material | Steel, case-hardened |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Approval | ETA-06/0007 |
Suitable for use in the following materials | Steel |
Last viewed
Stud with threaded end ≈ 2d DIN 835, steel 10.9, zinc flake, silver (ZFSHL)
Warning and beacon lamp
Centre-grooved dowel pins ISO 8742 steel plain
Intermediate stand crash protection
ELMO® divisional wall duct 1 x ∅ 6-40 mm sealing on one side
Stud with threaded end ≈ 1.25 d
Handle
Hexagon nut, low profile with fine thread DIN 439, brass, plain
Slotted screwdriver with round shank
STARLINE® waist jacket