Roofing screw EUROFAST® Stainless steel EDS-BZTR
EUROFAST EDS-BZTR sst A4 zp w. drill tip
SCR-HEX-(EDS-BZTR-48160)-4,8X160 BI-MET
Register now and access more than 125,000 products
- For use with retaining plates, shape: D (deep = 4.85 mm non-slip), XH (XtraHigh)
- According to technical seal regulations, corrosion-resistant fasteners should be used in the event of refurbishment.
Fastener length on
- trapezoidal steel surface = roof structure + min. 20 mm
- Wooden surface = roof structure + min. 30 mm
- ETA-06/0007 approval
- Tested in accordance with DIN 50018 = 15 Kesternich cycles
Datasheets(X)
CAD data (available after login)
Flat Roof
 | |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 160 mm |
Drill tip length (lp) | 5 mm |
Head diameter (dk) | 10.5 mm |
Head height (dk) | 4.3 mm |
Head type | Hexagon washer head |
Shape of tip | Drilling tip |
Thread design | Partial thread with underhead thread |
Thread length (tapping screw thread) (l2) | 105 mm |
Drive type | Outer hexagon |
External drive (s1) | WS8 |
Max. material thickness to be drilled through | 2 x 1.5 mm |
Material | Bimetal |
Surface | Zinc Duplex |
RoHS-compliant | Yes |
Approval | ETA-06/0007 |
Suitable for use in the following materials | Steel |
Last viewed
Solid carbide end mill With Speedcut Universal corner radius, extra-long XXL, optional, four cutting edges, uneven angle of twist gradient
Solid carbide end mill With Speedcut Universal corner radius, extra-long XXL, optional, four cutting edges, uneven angle of twist gradient
Article sticker
Tiler's line
Fully threaded hexagonal bolt and fine thread
Safety sandals, S1P
Hexagonal bolt
Data and charging cable 2-in-1 Micro USB and USB Type-C/USB Type-A
Work dungarees
Knob cylinder 3KS