Roofing screw OMG® DFDS-60 (HD)
Steel chrome plated OMG-DFDS-60 HD
SCR-RAISCS-UNI-(DFDS-60095)-6,0X95
Register now and access more than 125,000 products
- Drill tip type, loose
- Safe to walk on in conjunction with an OMG retaining plate
- Drill diameter = 5.0/5.5 mm (depending on the concrete quality)
- Drill hole depth = fastener length + min. 10 mm
Fastener length on
- trapezoidal steel sheet = roof structure + min. 20 mm/ETA
- Wood = roof structure + screw-in depth min. 30 mm/ETA
- Aerated concrete = roof structure + min. 60 mm
- Bims = roof structure + screw-in depth min. 60 mm
- Concrete = structure strength + screw-in depth min. 25 mm/ETA
- ETA-09/0337 approval
- FM approval
- Tested in accordance with DIN 50018 = 30 Kesternich cycles
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 6 mm |
Length (l1) | 100 mm |
Drill tip length (lp) | 5 mm |
Head diameter (dk) | 11 mm |
Head height (dk) | 3 mm |
Head type | Pan head |
Thread design | Partial thread |
Thread length (tapping screw thread) (l2) | 75 mm |
Drive type | H |
Material | Steel, case-hardened |
Surface | Cathodic dip painting |
RoHS-compliant | Yes |
Approval | ETA-09/0337 |
Suitable for use in the following materials | Steel |
Last viewed
Winter protective gloves Ejendals TEGERA® 525
Hexagonal bolt with thread up to the head
Low-cut safety shoes, S1P
Countersunk screw with hexalobular head
Knife blade Martor scalpel blade no. 1025
Vehicle bulb cabinet With 18 drawers
S3L safety shoe Uvex1 XCraft 6803
Rectangular rail set Nova Pro
Hexagonal bolt with thread up to the head
Hexagonal bolt with thread up to the head