Roofing screw OMG® DFDS-60 (HD)
Steel chrome plated OMG-DFDS-60 HD
SCR-RAISCS-UNI-(DFDS-60127)-6,0X127
Register now and access more than 125,000 products
- Drill tip type, loose
- Safe to walk on in conjunction with an OMG retaining plate
- Drill diameter = 5.0/5.5 mm (depending on the concrete quality)
- Drill hole depth = fastener length + min. 10 mm
Fastener length on
- trapezoidal steel sheet = roof structure + min. 20 mm/ETA
- Wood = roof structure + screw-in depth min. 30 mm/ETA
- Aerated concrete = roof structure + min. 60 mm
- Bims = roof structure + screw-in depth min. 60 mm
- Concrete = structure strength + screw-in depth min. 25 mm/ETA
- ETA-09/0337 approval
- FM approval
- Tested in accordance with DIN 50018 = 30 Kesternich cycles
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 6 mm |
Length (l1) | 125 mm |
Drill tip length (lp) | 5 mm |
Head diameter (dk) | 11 mm |
Head height (dk) | 3 mm |
Head type | Pan head |
Thread design | Partial thread |
Thread length (tapping screw thread) (l2) | 100 mm |
Drive type | H |
Material | Steel, case-hardened |
Surface | Cathodic dip painting |
RoHS-compliant | Yes |
Approval | ETA-09/0337 |
Suitable for use in the following materials | Steel |
Last viewed
Stud with threaded end ≈ 1 d
Plus Quadro-L Vario hammer drill bit
Stepped bars
Screw with flattened half round head and hexagon socket ISO 7380-1 steel FK010.9, zinc-nickel-plated silver (ZNSHL)
Tapered pin with female thread, unhardened ISO 8736, steel, plain, type A (ground) unhardened
Weatherproof trousers
Two-hand angle grinder EWS 24-230
Threaded fitting
Work dungarees
Button-head rivet