Roofing screw OMG® DFHD-67 (XHD)
Steel black chrome pltd OMG-DFHD-67 XHD drill tip
SCR-RAISCS-UNI-(DFHD-670203)-6,7X203
Register now and access more than 125,000 products
- Drill tip type, loose
- Safe to walk on in conjunction with an OMG retaining plate
- Fastener length on trapezoidal steel sheet = roof structure + min. 20 mm/ETA
- Fastener length on thin sheet metal = roof structure + min. 20 mm
- ETA-09/0337 approval
- FM approval
- Tested in accordance with DIN 50018 = 15 Kesternich cycles
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 6.7 mm |
Length (l1) | 200 mm |
Drill tip length (lp) | 4 mm |
Head diameter (dk) | 11 mm |
Head height (dk) | 3 mm |
Head type | Pan head |
Shape of tip | Drilling tip |
Thread design | Partial thread |
Thread length (tapping screw thread) (l2) | 100 mm |
Drive type | H |
Material | Steel, case-hardened |
Surface | Cathodic dip painting |
RoHS-compliant | Yes |
Approval | ETA-09/0337 |
Suitable for use in the following materials | Steel |
Last viewed
Raised countersunk tapping screw, C shape with H recessed head
Fine-grain pen
Insert For shaping devices
Low-cut safety shoe S3
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, chrome-plated (F2J)
Bolt with head
Pan head tapping screw, shape C with AW drive
HSCo8 end mill, short, centre-cutting DIN 844K
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, steel, zinc-plated, blue passivated, shape C (with tip)
Helical insert W.TEC® INSERT COIL Free Running