Round-head nail NK 700 With steel washer
Round-headed nail NK 700
NL-RDHD-NK700-DISC12MM-16MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
Length calculation for nails used on steel surfaces (min. 5 mm thick):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or tightening tests.
Datasheets(X)
Universal nail for steel substructures and concrete substrates (standard concrete ≥ C 12/15 ≤ C 50/60) in accordance with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Shaft length (SL) | 16 mm |
Shank diameter (ds) | 3.7 mm |
Washer diameter (ØS) | 12 mm |
Head diameter (dk) | 5.6 mm |
Suitable for device type | Hilti DX 450, Hilti DX5 |
Last viewed
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 10.9, zinc-plated, blue passivated (A2K)
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Cylindrical grooved pin with chamfer DIN 1473, A1 stainless steel, plain
Light-duty rope thimble DIN 6899, zinc-plated steel, blue passivated (A2K)
Countersunk screw with hexalobular head
Dry wall screw Top Head
Hexagonal bolt with shank DIN 931, steel 8.8U, hot-dip galvanised
Pack of 5 socks
Key, high profile DIN 6885, stainless steel 1.4571, shape A
Sanding belt, fabric VSM KK711T