Round-head nail NK 700 With steel washer
Round-headed nail NK 700
NL-RDHD-NK700-DISC12MM-37MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
Length calculation for nails used on steel surfaces (min. 5 mm thick):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or tightening tests.
Datasheets(X)
Universal nail for steel substructures and concrete substrates (standard concrete ≥ C 12/15 ≤ C 50/60) in accordance with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Shaft length (SL) | 37 mm |
Shank diameter (ds) | 3.7 mm |
Washer diameter (ØS) | 12 mm |
Head diameter (dk) | 5.6 mm |
Suitable for device type | Hilti DX 450, Hilti DX5 |
Last viewed
Divider bracket For Nova Pro Scala rectangular rail
Box-end plug-in torque wrench head drive Stahlwille 732/100
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Steel spacer stud
Plumbers'/metalworkers' round nose pliers
Safety boots, S3
Refuse bag Without pull tie
Eyelet screw GS
OrgaAer central lock For hanging frames and wide drawers
Mains unit 24 V