Round head screw with square neck DIN 603, steel 4.8, zinc flake, silver (ZFSHL)
DIN 603 steel 4.8 zinc flake
SCR-MHD-DIN603-4.8-(ZFSHL)-M6X16
Register now and access more than 125,000 products
Zinc flake coatings are chrome (VI)-free corrosion protection coatings for commercial vehicle construction, construction machines, agricultural vehicles and equipment, and all other fields that require vehicle construction standard corrosion protection requirements.
The corrosion resistance of ZFHSL is as follows:
- Diameter ≥ M6 - 480h*
- Diameter ≥ M10 - 720h*
The designation ZFSHL refers to the following corrosion coating:
- Zinc flake coating, with top coat, silver colour, with lubrication that alters the friction coefficient.
- Adjusted friction coefficient range from 0.09μ - 0.14μ due to top coat with integrated lubricating particles
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 16 mm |
Material | Steel |
Property class | 4.8 |
Surface | Flake zinc silver |
Head diameter (dk) | 16.55 mm |
Head height (k1) | 3.88 mm |
Square width (V) | 6.48 mm |
Square height (f) | 4.6 mm |
Internal drive | 0 - not applicable |
Standards | DIN 603 |
RoHS-compliant | Yes |
Design | 0 - not applicable |
Head type | Cup head square neck |
Head details | With square neck |
Drive type | 0 - not applicable |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Product class | C |
Area of application | 0 - not applicable |
Regulated area | 0 - not applicable |
Last viewed
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537K, 3xD short, 4 drill heels, with internal cooling
ISO insert holder with S clamping system for VC indexable inserts
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537K, 3xD short, 4 drill heels, with internal cooling
Pass-through ratchet adapter For 3/8 inch socket wrench
Profile cylinder measuring key, type B
Hexagonal bolt with shank and fine thread
Hexagonal bolt with thread up to head for pressure container construction DIN 933, A2 stainless steel, plain
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Cable grommet with perforated membrane CR
Solid carbide end mill with corner radius Speedcut-Universal, DIN 6527L, long, optional, four-lipped drill, uneven angle of twist gradient