Round head screw with square neck DIN 603, steel 4.8, zinc-plated, blue passivated (A2K)
DIN 603 steel 4.8 zinc plated
SCR-MHD-DIN603-4.8-(A2K)-M12X130
Register now and access more than 125,000 products
The flat square neck fixes the round head screw e.g. in a slot and allows tightening from the nut side without counter-tensioning.
Datasheets(X)
Use in wood construction, especially carpenter's workshops, pre-fabricated house construction, vehicle construction (e.g. truck load platforms), boat building, trade fair construction, scaffolding construction, for heavy, demountable transport racks or machine crates and transport crates for sea transport. Used to join wooden parts or wood and metal parts. The square neck is sunk into the wood. Hole diameter is dependent on thread dimensions. For joining wood to wood, a larger washer must be placed under the nut, e.g. a wood construction washer.
 | |
Length (l1) | 130 mm |
Surface | Zinc plated |
Standards | DIN 603 |
RoHS-compliant | Yes |
Design | 0 - not applicable |
Drive type | Outer hexagon |
Thread length (metric thread) (b) | 36 mm |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread (ISO-compliant). Steel, 8.8U, hot-dip galvanised (hdg).
1/2 inch power extension With 1/2 inch square drive and ball lock
Safety boots, S3
Maintenance oil Multi
Hexagonal bolt with shank
Silicone spray grease
Collated nails and gas cartridge NG CSM-1
Hexagonal bolt with shank