Round head screw with square neck DIN 603, steel 8.8, zinc-plated, yellow chromated (A3C)
DIN 603 steel 8.8 zinc plated yellow
SCR-MHD-DIN603-8.8-(A3C+L)-M8X110
Register now and access more than 125,000 products
The flat square neck fixes the round head screw e.g. in a slot and allows tightening from the nut side without counter-tensioning.
Datasheets(X)
Use in wood construction, especially carpenter's workshops, pre-fabricated house construction, vehicle construction (e.g. truck load platforms), boat building, trade fair construction, scaffolding construction, for heavy, demountable transport racks or machine crates and transport crates for sea transport. Used to join wooden parts or wood and metal parts. The square neck is sunk into the wood. Hole diameter is dependent on thread dimension. For joining wood to wood, a larger washer must be placed under the nut, e.g. a wood construction washer.
 | |
Thread type x nominal diameter (d1) | M8 |
Length (l1) | 110 mm |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated yellow |
Head diameter (dk) | 20.65 mm |
Head height (k1) | 4.88 mm |
Square width (V) | 8.58 mm |
Square height (f) | 5.6 mm |
Standards | DIN 603 |
RoHS-compliant | No |
Head type | Cup head square neck |
Head details | With square neck |
Thread type | Metric thread |
Pitch | 1.25 mm |
Thread form | Standard metric thread |
Thread length (metric thread) (b) | 22 mm |
Product class | C |
Last viewed
Moveable flange
System case 4.4.1 transparent
Countersunk tapping screw, shape F with Z recessed head DIN 7982, steel, zinc-plated, blue passivated
Twin wheel swivel machinery castor Hard with locking device
Spirit level made of light metal
Hexagonal bolt with shank
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Square wedge-shaped washer DIN 434, A2 stainless steel, plain, wedge-shaped, for U section
Work shirt, long sleeves
Wire cable barrel terminal with right-handed thread