Round head screw with square neck
DIN 603 steel 8.8 zinc plated thick-layer pass.
SCR-MHD-DIN603-8.8-(VZD)-M16X55
Register now and access more than 125,000 products
The flat square neck fixes the round head screw e.g. in a slot and allows tightening from the nut side without counter-tensioning.
Connection elements with zinc-plated chromium(VI)-free zinc thick-film passivation (VZD) offer a future-proof alternative to surfaces containing chromium(VI). The coating consists of a zinc layer with passivation on a chromium (III) basis.
Overview of advantages:
- Chrome(VI)-free alternative to A2C or A3C
- Thermal capacity up to 120°C
- Even coating distribution
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M16 |
Length (l1) | 55 mm |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated thick-layer passivation |
Head diameter (dk) | 38.800 mm |
Head height (k1) | 8.75 mm |
Square width (V) | 16.7 mm |
Square height (f) | 12.9 mm |
Standards | DIN 603 |
RoHS-compliant | Yes |
Head details | With square neck |
Thread type | Metric thread |
Pitch | 2 mm |
Shank diameter | 16 mm |
Thread length (metric thread) (b) | 38 mm |
Product class | C |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Collet chuck for straight grinder
EPS profile thumbturn cylinder
All-round paint spray gun AP HVLP
Halogen-free DIN wiring duct
Pan head screw with H cross recess DIN 7985, steel 4.8, chrome-plated (CR)
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Hexagonal bolt with thread up to the head ISO 4017, brass, nickel-plated
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, A2 stainless steel, shape C (with tip)
ORSY®BULL partition elements For dividing ORSY®BULL top loader boxes according to individual requirements