Round wire snap ring and snap ring groove for shafts
DIN 9925 for shaft
SNAPRG-DIN9925-D14,0
Register now and access more than 125,000 products
DIN 9925 replaces DIN 7993 shape A
Datasheets(X)
CAD data (available after login)
 | |
Type | RW 14 |
Suitable for shafts | 14 mm |
Suitable for groove diameter | 13 mm |
Internal diameter (d1) | 12.8 mm |
Slot width (e1) | 3 mm |
Width (b1) | 1 mm |
Thickness (s1) | 1 mm |
Standards | DIN 9925 |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Hybrid bomber jacket
Divider assortment With compartment rails and compartment dividers for system dimensions 8.6
UNI knee pads For working on very hard and rough surfaces
Threaded rod DIN 976, steel 4.8, plain, shape A
1/4 inch socket wrench insert, metric short
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HB shank
System box
Engine sealing compound Silicone Special 180
Mounting profile pair for workbenches
Screw cap with thread Sundström T06-0640