Rubber wheel with rotating holder and locking brake
Industrial swivel castor rubber w. locking device
INDUSTSWIVCSTR-STSTE-SCRONPLT-D100-150KG
Register now and access more than 125,000 products
- Hub with ball bearing
- Outer casing made of vulcanised rubber with increased resistance to cracks and wear. Hardness 73 Shore A (±3)
- Working temperature: from -20°C to +70°C
- Rotating holder on balls
Not suitable for use in the presence of solvents, hydrocarbons and mineral oils.
Specified dimensions not binding. Subject to technical changes!
 | |
Roll diameter (D) | 100 mm |
Roll width (L) | 40 mm |
Height (H) | 128 mm |
Load capacity | 150 kg |
Length (A) | 100 mm |
Width (B) | 85 mm |
Hole distance (a) | 80 mm |
Hole distance 2 (b) | 60 mm |
Elongated hole diameter (c) | 9 mm |
Shore A hardness | 70 |
Min. temperature conditions | -20 °C |
Max. temperature conditions | 70 °C |
Bolt hole depth (R) | 35 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
FLEXEN® rock wool
Hexagonal nut with clamping piece (all-metal) DIN 6925, steel 8, plain
W-VIZ-A anchor rod, A4 stainless steel for W-VIZ/A4 injection systems (concrete)
Slotted countersunk head screw DIN 963, A2 stainless steel, plain
Slotted flat-head screw DIN 85, steel 4.8, nickel-plated (E2J)
Stud with threaded end ≈ 1 d DIN 938, A2/70 stainless steel, plain
Slotted flat-head screw DIN 85, A2-70 stainless steel, plain
Set screw hex socket and ring cutter IN
Ducting clamp Part 2 – Heavy series
Analogue tyre inflator
