Welcome to Würth Aerospace Solutions For trade customers only
Rust Stop Quattro primer - PRIM-(ROSTSTOP QUATTRO)-400ML

Rust Stop Quattro primer

Primer Rust-Stop Quattro
PRIM-(ROSTSTOP QUATTRO)-400ML

Art.-no. 08932141
EAN 4046778396781
All versions

Prices for customers after login
Rust Stop Quattro primer

Art.-no. 08932141

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Fast-drying universal primer with a broad range of applications

Unique combination of primer, adhesion promoter, corrosion protection and welding primer in a single product



Primer reliably prevents further rusting with anti-oxidation formula.



Adhesion agent


  • Good application surface structure for further painting work

  • Suitable for use in conjunction with PU and MS polymer sealing compounds


Corrosion protection


  • Excellent, long-term protection against oxidation

  • Outstanding resistance to spray water and salt water


Welding substrate, full penetration welding possible wet and dry



Very high temperature resistance up to 300°C, briefly up to 500°C



VOC-compliant


  • Lower solvent content

  • Complies with the maximum VOC content specified in the VOC Directive (1999/13/EC)
Notice

After use, turn the can upside down and spray until the valve is empty.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Freight forwarding companies, transport companies, commercial vehicle repair workshops, vehicle construction, building trade, concrete mixing plants, agriculture, forestry, local authorities etc.

Instructions

The substrate must be clean, dry and free from grease. Lightly sand problematic surfaces. Shake can well before use. Apply a thin coat for the first spray coating. Observe the flash-off time. Can be painted after approx. 20 minutes with all commercially available 1-component, 2-component and water-based top-coat paint systems.

Contents

400 ml

Chemical basis

Polyvinyl butyral

Colour

Silver grey

Max. processing temperature

40 °C

Density

0.75 g/cm³

Max. temperature resistance

300 °C

Max. short-term temperature resistance

500 °C

VOC concentration (CH)

669 g/l

Min. processing temperature

5 °C

Shelf life from production

24 Month

Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Silicone remover
Silicone remover

SILREM-AEROSOLCAN-600ML

For professional cleaning and degreasing before applying adhesives or painting
2-component HS top coat
2-component HS top coat

TOPCOAT-2C-HS-GLOSSY-COLORCAT1-1LTR

High-solid HS acrylic paint with high degree of resistance to UV and weathering.
x 1 pcs
2-component HS top coat
2-component HS top coat

TOPCOAT-2C-HS-GLOSSY-COLORCAT1-3LTR

High-solid HS acrylic paint with high degree of resistance to UV and weathering.
x 1 pcs
2-component HS top coat
2-component HS top coat

TOPCOAT-2C-HS-SATINGLOSS-COLORCAT1-3LTR

High-solid HS acrylic paint with high degree of resistance to UV and weathering.
x 1 pcs
2-component HS top coat
2-component HS top coat

TOPCOAT-2C-HS-GLOSSY-COLORCAT2-1LTR

High-solid HS acrylic paint with high degree of resistance to UV and weathering.
x 1 pcs
2-component HS top coat
2-component HS top coat

TOPCOAT-2C-HS-GLOSSY-COLORCAT2-3LTR

High-solid HS acrylic paint with high degree of resistance to UV and weathering.
x 1 pcs
2-component HS top coat
2-component HS top coat

TOPCOAT-2C-SATINGLOSS-COLORCAT2-3LTR

High-solid HS acrylic paint with high degree of resistance to UV and weathering.
x 1 pcs
1-component thick-film lacquer
1-component thick-film lacquer

THCKCOATLAC-1C-SATINGLOSS-COLORCAT1-1KG

Primer, corrosion protection and lacquer in a single product.
x 1 pcs
1-component thick-film lacquer
1-component thick-film lacquer

THCKCOATLAC-1C-SATINGLOSS-COLORCAT1-5KG

Primer, corrosion protection and lacquer in a single product.
x 1 pcs
1-component thick-film lacquer
1-component thick-film lacquer

THCKCOATLAC-1C-SATINGLO-COLORCAT1-25KG

Primer, corrosion protection and lacquer in a single product.
x 1 pcs
1-component thick-film lacquer
1-component thick-film lacquer

THCKCOATLAC-1C-SATINGLOSS-COLORCAT2-1KG

Primer, corrosion protection and lacquer in a single product.
x 1 pcs
1-component thick-film lacquer
1-component thick-film lacquer

THCKCOATLAC-1C-SATINGLOSS-COLORCAT2-5KG

Primer, corrosion protection and lacquer in a single product.
x 1 pcs
1-component thick-film lacquer
1-component thick-film lacquer

THCKCOATLAC-1C-SATINGLO-COLORCAT2-25KG

Primer, corrosion protection and lacquer in a single product.
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 5
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details