Rust Stop primer

Name: Rust Stop primer
Brand: Würth
SKU: 0890191

Primer Rust-Stop
PRIM-RUSTSTOP-750ML

Art.-no. 0890191

EAN 4046778503790

All versions

Specification

Brushable, active corrosion protection for metallic surfaces

Excellent corrosion protection

Fulfils corrosivity category C3 "high" according to DIN EN ISO 12944

Approx. 500 hours according to DIN EN ISO 9227

Resistant to water, seawater and many chemicals

Quick to dry

Processed materials can be used and transported quickly

Ideally suited as transport coating in steel construction

Can be painted over

Short-term temperature resistance up to +120°C

VOC-compliant

Lower solvent content

Complies with the maximum VOC content specified in the VOC Directive (1999/13/EC)

Notice

Note: Can be coated with commercially available top coating systems as per the table (see TDS)

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

Corrosion-proof priming in vehicle construction, ship building, metal and steel construction, tool manufacturing, bridge building, tank construction, pipeline construction, container construction, agriculture and forestry, municipal management, construction machinery, etc.

Instructions

The surface must be clean, dry and free from grease. Remove loose rust, paint and dirt using a wire brush, scraper or similar tool. Stir material well before use. Apply two coatings approx. one hour apart.

Technical information

Weight of content	960 g
Contents	750 ml
Chemical basis	Alkyd resin
Colour	Red brown
Drying time	16 h
Yield (area)	8 m²
Min. application quantity in volume/area	90 ml/m²
Max. processing temperature	25 °C
Density	1.28 g/cm³
Min./max. temperature resistance	-30 to 80 °C
Max. temperature resistance	80 °C
Max. short-term temperature resistance	120 °C
Density conditions	at 20°C
Min. processing temperature	15 °C
Shelf life from production	12 Month
Conditions to maintain shelf life from production	at 10°C to 35°C, no exposure to sunlight, no heat sources

Documents

Product information

Datasheets (1)

Safety data sheet

Certificates/ Documents (0)

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

Silicone remover

SILREM-AEROSOLCAN-600ML

Art.-no. 0893222600

For professional cleaning and degreasing before applying adhesives or painting

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).