Rust remover Rost-Off - RUSTREM-(ROST-OFF)-CANISTER-5LTR

Rust remover Rost-Off

Name: Rust remover Rost-Off
Brand: Würth
SKU: 0890300

Rust remover Rost Off
RUSTREM-(ROST-OFF)-CANISTER-5LTR
ROST-OFF

Art.-no. 0890300

EAN 4038898354437

All versions

Similar products

Prices for customers after login

Rust remover Rost-Off

Art.-no. 0890300

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

High-quality rust remover

High capillary activity

Optimum creeping properties produce a high degree of rust penetration, i.e. even stubborn, rusted-on screw connections are removed

Optimum rust removal

Penetrates rust and loosens seized screws and bolts

Excellent water displacement

Displaces and penetrates moisture, e.g. in the case of contact difficulties

Corrosion protection additives for optimum corrosion protection

Provides lasting protection against further corrosion

Resin- and acid-free

Silicone-free

Compatible with rubber and seals

Notice

This information is only a recommendation based on our experience. Check material compatibility on an invisible area if necessary.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For releasing rusty and oxidised screw connections on passenger cars, lorries, agricultural and construction machinery, assemblies and devices

Instructions

Spray the parts to be treated and allow to take effect briefly. With stubborn connections, repeat application and extend soaking time where necessary.

Contents	5 l
Container	Canister
Min. temperature conditions	-10 °C
Max. temperature conditions	140 °C
Kinematic oil basis viscosity	16.5 mm²/s
Conditions for viscosity of oil basis	at 40°C
Chemical basis	Mineral oil
Silicone-free	Yes
Shelf life from production	24 Month
Resin-free	Yes
Acid-free	Yes

Additional accessory:

Product

Description

Quantity

Price
/PU

Filling system REFILLO®

PNCANI-REFILLO-EMPTY-(ROST OFF PLUS)

REFILLO

Art.-no. 08918002

The safe and economical system for manual refilling of spray cans with active substances and compressed air.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additive article:

Product

Description

Quantity

Price
/PU

Tap DN 45 thread for 5 l and 10 l plastic canisters

TAP-(F.PLACANI-5LTR)

Art.-no. 089130201

The tap makes it quick and easy to cleanly fill up and dispense liquids and helps with dosing large amounts of liquid in a short period of time.

x 1 pcs

Empty container with spray gun Rost Off Plus

EMPTYCONT-F.RUSTREM-SPRBTL-500ML

Art.-no. 0891502005

Lockable regulating nozzle permits all settings from mist to jet

x 1 pcs

Compressed-air filling station Refillo<SUP>®</SUP> combi

Compressed-air filling station Refillo® combi

FILSTA-COMPRESSED AIR CANS-COMBI

REFILLO

Art.-no. 0891800001

For quick and easy pressurised filling of REFILLO & REFILLOmat cans

x 1 pcs

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.