Welcome to Würth Aerospace Solutions For trade customers only
S42LTAK46CAT-I lift - SCISLFT-4,2T-LTAK46-CAT-I

S42LTAK46CAT-I lift

Scissor lift 4.2 t S42LTAK46-CAT
SCISLFT-4,2T-LTAK46-CAT-I

Art.-no. 9501014434

EAN 4057612860993

All versions

Individual price display after login
S42LTAK46CAT-I lift

Art.-no. 9501014434

Individual price display after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

4.2 t electro-hydraulic drive-on scissor lift
  • Optimal corrosion protection - cataphoretic coating (CAT) and powder coating as standard

  • Recesses with stainless steel supports in the driving surface enable the use of rotating plates

  • Sturdy plastic balls on the pneumatic-locking sliding plates ensure durability and ease of use

  • Intelligently designed anti-rollback mechanisms allow the entire 4,600 mm track to be used

  • Versatile pick-up using wheel lifters with an extendable, stepless platform extension on all LT models

  • A zinc plated guide rail is installed as standard for use of an additional jacking beam

  • The flat track enables use at the headlight adjustment point (not with optional joint play tester)

  • Includes limit switch - can be installed at floor level

  • Electrohydraulic drive with self-venting system

  • Pneumatic-locking set-down mechanism on the main cylinders. The catch bar can be adjusted using adjustment screws, enabling precise wheel alignment

  • Quiet-running hydraulic unit integrated in the control panel

- Operation via push buttons


- Integrated document storage


  • Sturdy base support frame ensures correct and simple installation of the lift


Scope of delivery


  • 2x pre-assembled lifting units

  • Pre-assembled control panel

  • 4x rubber supports 40 mm

  • Assembly material (not including anchors or oil)
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Load capacity

4200 t

Drive for lifting platform

Electro-hydraulic

Lift height

2100 mm

Number of control units

1 PCS

Base frame

No

Over-ground

Yes

Compensation equipment

Electronic

Type of vehicle

Passenger car and transporter

Nominal voltage

400 V

Colour

Light grey

Service components
Category Services Art. no.
Service Drive-on platform delivery 5996 001 394
Service Drive-on platform installation: levelling, lighting, axle jack, installation of material 5996 001 395
Service Forklift for drive-on lift/scissor lift installation incl. delivery 5996 001 233
Service Removing the column lifting platform 5996 001 393
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Handling
Handling

FREIGHT-RUNWAY-LIFT-INCL.FORKLIFT

x 1 pcs
Handling
Handling

MNTG-RUNWAY-LIFT-LEVELLING-INCL.MAT

x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Handling
Handling

FORKL-F.MNTG-FFL.-SCISS.-LIFT-INCL-FREI.

x 1 pcs
Handling
Handling

DEMNTG-RUNWAY-LIFT

x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Vehicle workshop equipment machines
Vehicle workshop equipment machines
x 1 pcs
Vehicle workshop equipment machine AY
Vehicle workshop equipment machine AY
x 1 pcs
Vehicle workshop equipment machine AY
Vehicle workshop equipment machine AY
x 1 pcs
Vehicle workshop equipment machine AY
Vehicle workshop equipment machine AY
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details