Welcome to Würth Aerospace Solutions For trade customers only

SC Multi Performance spot-weld drill bit DIN 1897

SC spot weld drill bit DIN 1897, 4 blades, Magma
DRL-SPTWELD-DIN1897-SC-4CUTEDGE-10X89MM
ZEBRA

Art.-no. 0710789100
EAN 4061975387141

Prices for customers after login
SC Multi Performance spot-weld drill bit DIN 1897

Art.-no. 0710789100

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

The universal high-performance spot weld drill bit for loosening spot welds on all bodywork panels including ultra high-strength components (BTR, BOR etc.) on all kinds of vehicles, e.g. on A-pillars, B-pillars, sills etc.

Tool geometry with 4 cutting edges for the most demanding work without compromising



Extremely high cutting performance


Up to 100 % faster compared to conventional solid carbide spot weld drills with 3 blades



Extremely durable


Up to 100 % longer service life compared to conventional solid carbide spot weld drills



Extremely robust


Significantly fewer brittle centring points compared to conventional solid carbide spot weld drills



Extremely comfortable


Optimum drilling behaviour due to very good centring on the spot weld



MAGMA multilayer coating


  • High oxidation and thermal stability (up to 800°C operating temperature)

  • Very hard and wear-resistant (hardness approx. 3500 HV)

  • Up to 9-times longer service life compared to uncoated spot weld drills

  • Up to 2-times longer service life compared to conventional coatings, e.g. TiN


3-face shank for faster and more comfortable working with hand-held drills


  • No spinning in the drill chuck

  • Optimal power transmission

  • Protection of the drill chuck from damage

  • Little effort required to open and close the drill chuck
Notice
  • Not for use in pneumatic machines (e.g. Vario drill, Spitznagel etc.)

  • Do not use in drills with an impact chuck or spindles
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Suitable for use in drills with 3-jaw chuck

Instructions
  • The solid carbide material is extremely hard, making it very brittle and prone to breaking if not handled correctly.

  • Position the drill bit precisely and at a right angle. Position the cutter in the centre first, then drill applying even contact pressure

  • Avoid hard attachment as well as lateral impacts and dropping of the drill under all circumstances

  • Use coolants/lubricants if possible

Quality

ZEBRA-Premium

Cutting material

SC

Surface

Magma multilayer coating

Suitable for tensile strength up to

1500 N/mm²

Diameter

10 mm

Length

89 mm

Chip flute length

43 mm

Shank diameter

10 mm

Shank style

3-face shank

Type

DIN 1897 solid carbide multi-performance

Service life (points system)

4 of 4 points

Drilling speed (point system)

4 of 4 points

Bore hole quality (point system)

4 of 4 points

Versatility (points system)

4 of 4 points

Drilling behaviour (point system)

4 of 4 points

Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Highly active, high-performance cutting foam for all machining work.
CUT+COOL Perfect drilling and cutting oil

CUTOIL-PERFECT-(CUT-COOL)-400ML

High-performance cutting oil for the heaviest machining work and higher cutting speeds
Cut and Cool Perfect drilling/cutting paste

CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Optimum results and safety for all materials and applications
Cordless drill driver ABS 18 POWER M-CUBE

DRLDRIV-CORDL-(ABS 18 POWER)-2X4AH-8.4.2

MASTER M-CUBE
Very powerful, handy cordless drill driver specially designed for hard use on construction sites with a torque of 140 Nm
x 1 pcs
ABS 18 COMPACT M-CUBE cordless drill/driver

DRLDRIV-CORDL-(ABS 18 COMPACT)-2X4.0AH

MASTER M-CUBE
Compact, powerful and brushless cordless drill screwdriver for moderate screwing and drilling work, developed by Würth to meet the requirements of tradesperson
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information