Welcome to Würth Aerospace Solutions For trade customers only
SC twist drill bit DIN 6537K - DRL-TWST-DIN6537K-HS-IC-SC-TNS-HB-D6,0MM SC twist drill bit DIN 6537K - DRL-TWST-DIN6537K-HS-IC-SC-TNS-HB-D6,0MM
SC twist drill bit DIN 6537K - DRL-TWST-DIN6537K-HS-IC-SC-TNS-HB-D6,0MM - 1
SC twist drill bit DIN 6537K - DRL-TWST-DIN6537K-HS-IC-SC-TNS-HB-D6,0MM - 2

SC twist drill bit DIN 6537K

Twist drill SD DIN6537K type H TiAlN-S UHS
DRL-TWST-DIN6537K-HS-IC-SC-TNS-HB-D6,0MM

Art.-no. 5443002523
EAN 4055375916186
All versions

Prices for customers after login
SC twist drill bit DIN 6537K

Art.-no. 5443002523

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Especially for machining high-strength and hardened steels up to 68 HRC. Very high stability and low wear owing to convex blade geometry. Special grinding ensures optimal chip breakage, high centring accuracy and low cutting forces.
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Product code

6857

Material to be processed

Cast metal, Hard and tough material

Standards

DIN 6537

Design

Short

Surface

TiAlN-S

Max. drilling depth (D)

3xD

Cutting material

SC

Number of guiding chamfers

2 PCS

Angle of the tip

140 Degree

Number of cutting edges

2 PCS

Coolant supply

External

Diameter (d1)

6.0 mm

Shank style

Cylindrical DIN 6535-HB

Length (l1)

66 mm

Chip flute length (l2)

28 mm

Tolerance of cutting edge diameter

h7

Shank diameter (d2)

6 mm

Tolerance of shank diameter

h6

Material of sub-group

Nitriding steels < 1300 N/mm², Grey cast iron, Malleable cast iron, Steels > 45 HRC

Cutting values for solid carbide high-performance drill Speeddrill, Ultra Hard Steel, 68HRC 3xd without internal cooling
For dia. 3 to dia. 8.9
Material designation Tensile strength Cooling vc f
Dia. 3 to dia. 5.9 Dia. 6 to dia. 8.9
General structural steels < 500 N/mm² E 80 0,180 0,240
500-850 N/mm² E 70 0,180 0,240
Carbon steels < 850 N/mm² E 80 0,180 0,240
850-1000 N/mm² E 70 0,180 0,240
Unalloyed heat-treated steels < 700 N/mm² E 65 0,150 0,210
700-850 N/mm² E 65 0,150 0,210
850-1000 N/mm² E 65 0,150 0,210
Alloyed heat-treated steels 850-1000 N/mm² E 65 0,150 0,210
1000-1200 N/mm² E 50 0,150 0,210
Unalloyed case-hardening steels < 750 N/mm² E 75 0,180 0,240
Alloyed case-hardening steels < 1000 N/mm² E 70 0,180 0,240
1000-1200 N/mm² E 65 0,160 0,220
Nitriding steels < 1000 N/mm² 65 0,150 0,210
1000-1200 N/mm² E 65 0,150 0,210
Tool steels < 850 N/mm² E 50 0,150 0,210
850-1100 N/mm² E 50 0,150 0,210
Hardened steels 40-48 HRC E 28 0,080 0,090
48-55 HRC E 20 0,080 0,090
55-60 HRC E 16 0,080 0,090
60-68 HRC E 10 0,080 0,090
Spring steels < 1200 N/mm² E 40 0,150 0,210
Cast iron < 180 HB T/E 75 0,230 0,340
> 180 HB T/E 70 0,230 0,340
Nodular graphite, malleable iron > 180 HB E 75 0,200 0,250
> 260 HB E 70 0,200 0,250
Legend
T = dry
E = emulsion
vc = cutting speed [m/min]
f = feed [mm/r]
The suggested cutting values are reference values and must be adapted to the respective conditions.
Cutting values for solid carbide high-performance drill Speeddrill, Ultra Hard Steel, 68HRC 3xd without internal cooling
For dia. 9 to dia. 16
Material designation Tensile strength Cooling vc f
Dia. 9 to dia. 11.9 Dia. 12 to dia. 16
General structural steels < 500 N/mm² E 80 0,300 0,350
500-850 N/mm² E 70 0,300 0,350
Carbon steels < 850 N/mm² E 80 0,300 0,350
850-1000 N/mm² E 70 0,300 0,350
Unalloyed heat-treated steels < 700 N/mm² E 65 0,270 0,320
700-850 N/mm² E 65 0,270 0,320
850-1000 N/mm² E 65 0,270 0,320
Alloyed heat-treated steels 850-1000 N/mm² E 65 0,270 0,320
1000-1200 N/mm² E 50 0,270 0,320
Unalloyed case-hardening steels < 750 N/mm² E 75 0,300 0,350
Alloyed case-hardening steels < 1000 N/mm² E 70 0,300 0,350
1000-1200 N/mm² E 65 0,280 0,340
Nitriding steels < 1000 N/mm² 65 0,270 0,320
1000-1200 N/mm² E 65 0,270 0,320
Tool steels < 850 N/mm² E 50 0,270 0,320
850-1100 N/mm² E 50 0,270 0,320
Hardened steels 40-48 HRC E 28 0,110 0,130
48-55 HRC E 20 0,110 0,130
55-60 HRC E 16 0,110 0,130
60-68 HRC E 10 0,110 0,130
Spring steels < 1200 N/mm² E 40 0,270 0,320
Cast iron < 180 HB T/E 75 0,430 0,520
> 180 HB T/E 70 0,430 0,520
Nodular graphite, malleable iron > 180 HB E 75 0,350 0,400
> 260 HB E 70 0,350 0,400

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details