SH perforated sleeve for injection systems
Perforated sleeve SH
ANC-(SH)-PLA-TRANSP-20X200
Register now and access more than 125,000 products
Individual fixing point in masonry
- ALLROUNDER WIT-VM 250 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
- WIT-NORDIC injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
- BASIC WIT-PM 200 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
Do not use perforated sleeve SH in aerated concrete!
- European Technical Assessment ETA-16/0757 and ETA-20/0854: Individual fixing point + masonry in solid and perforated brick (perforated sleeve SH, ALLROUNDER WIT-VM 250 or WIT-NORDIC, anchor rod W-VI-A, standard threaded rod with acceptance test certificate 3.1)
- European Technical Assessment ETA-13/0037: Individual fixing point + masonry in solid and perforated brick (perforated sleeve SH, BASIC WIT-PM 200, anchor rod W-VI-A, standard threaded rod with acceptance test certificate 3.1)
Datasheets(X)
For anchoring in solid and perforated brick masonry
Type description | SH 20 x 200 |
Diameter | 20 mm |
Length | 200 mm |
Material | Plastic |
Nominal drill-bit diameter (d 0) | 20 mm |
Drill hole depth (h 0) | 205 mm |
Effective anchoring depth (h ef) | 200 mm |
Suitable for anchor rod | M12 |
Required injection mortar | WIT-PM 200 |
Approval | ETA-13/0037 |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexagonal bolt
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagon Socket Head Cap Screw with centre, with low head
HSCo DIN 338 type RN MFD VARIO twist drill bit assortment 19 pieces
Inside drawer For system hinged door cabinet
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm
Safety shoe S1
Bottle drain trap long Chrome-plated
Screwless hose clamp low overall height