SHARK DRY waterproof fixing set 352 pieces in system case 4.4.1
SHARK DRY anchor set 352 pcs
ANC-SET-SHARK-DRY-352PCS
Art.-no. 5964590820
EAN 4068362187841
Register now and access more than 125,000 products
- All-in-one assortment case for a tested, waterproof fastening in wet rooms
- The SHARK DRY sealing pads in conjunction with SHARK TWIST fixings, in addition to the A2 screws for SHARK DRY, ensure a tested, waterproof fastening
- Meets the requirements for drill hole seals in accordance with DIN 18534
- Can be used indoors for load classes W0-I (low), W1-I (moderate), W2-I (high), W3-I (very high)
- Tested in accordance with PG-AIV-F and EAD 030352-00-0503
- Tested by Säurefliesner e.V.
- The test report is included in the assortment case
Test report 101462401.001 in accordance with EAD 030352-00-0503, complies with testing principles for issuing general construction test certificates for sealing in conjunction with tile and panel covering part 1. (PG-AIV-F)
Test report 101462401.001 in accordance with EAD 030352-00-0503, complies with testing principles for issuing general construction test certificates for sealing in conjunction with tile and panel covering part 1. (PG-AIV-F)
Datasheets(X)
The SHARK DRY A2 screw for fixings is ideal for reliable sealing/fastening solutions in wet rooms in conjunction with the SHARK TWIST multi-purpose fixing and the corresponding A2 screws.
- 1. Drill the hole
- 2. Remove the drill debris from the drill hole
- 3. Ensure that the surface around the drill hole is free of dust and grease
- 4. Position the sealing pad with the centre hole first
- 5. Insert the SHARK TWIST fixing into the drill hole
- 6. Position the second pad (without hole) centrally on the fixing
- 7. Use your finger to press the pads around the collar
- 8. Screw the stainless steel screw through the fixture until the screw head rests on it
Number of pieces in assortment/set | 352 PCS |
Material | Polypropylene - PP / polyamide - PA |
System dimensions | 4.4.1, 2.2.1 |
SCR-ANC-SHARK DRY-A2-PH-TX25-5X50
SCR-ANC-SHARK DRY-A2-PH-TX30-6X60
SEALPAD-(SHARK DRY)-20/6-100PAIRS
SEALPAD-(SHARK DRY)-20/8-100PAIRS
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Elbow pipe wrench Swedish form, angled 90°
Hexagon bolt with shank ISO 4014, steel 10.9, plain
Universal dispenser unit with 5 reel holders
Countersunk screw with hexalobular head ISO 14581 plain 4.8 steel
Hexagonal bolt with shank and fine thread ISO 8765, zinc plated 10.9 steel with thick-layer passivation (VZD)
End cap set For LED recessed profile EBP-4
Diamond T-groove adapter for quick-action clamps
Wall bracket for compressed air preparation unit size 1
Release tool for connectors with two symmetrically arranged locking lugs
Wire end ferrule with plastic sleeve strips