Welcome to Würth Aerospace Solutions For trade customers only
SHARK ISO spiral insulation fixing set Zinc-plated steel - DWL-(SHARK ISO)-PLA-KIT-28X95-M10-(A2K) SHARK ISO spiral insulation fixing set Zinc-plated steel - DWL-(SHARK ISO)-PLA-KIT-28X95-M10-(A2K)
SHARK ISO spiral insulation fixing set Zinc-plated steel - DWL-(SHARK ISO)-PLA-KIT-28X95-M10-(A2K) - 1
SHARK ISO spiral insulation fixing set Zinc-plated steel - DWL-(SHARK ISO)-PLA-KIT-28X95-M10-(A2K) - 2

SHARK ISO spiral insulation fixing set Zinc-plated steel

DWL-(SHARK ISO)-PLA-KIT-28X95-M10-(A2K)

Art.-no. 590350096

EAN 4062856817887

All versions
Individual price display after login
SHARK ISO spiral insulation fixing set Zinc-plated steel

Art.-no. 590350096

Individual price display after login
Quantity
PU
x 20 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

For fastening drain pipes in pressure-resistant insulation materials and sustainable wood fibre insulation materials
  • Preassembled with an M10x120 zinc plated steel hanger bolt.

  • Works in all common pressure-resistant insulation materials.

  • Screws in perfectly without pre-drilling the insulation material.

  • For thin plaster layers < 4 mm, no pre-drilling is required.

  • Quick and inexpensive mounting without the formation of thermal bridges.

  • Resistant to rotting, weathering and ageing (high-quality PP).

  • Use a cordless driver for installation.

  • Mechanical interlock.

  • Applicable temperature range: -20 °C to +100 °C.

  • In addition to the scope of delivery, each set also contains 20 pcs PVC hose 12x65 mm.
Notice
  • Application in pressure-resistant insulation materials with or without plaster.

  • SHARK ISO zinc plated steel set must not be used outdoors or in wet rooms.
Application area

Rain pipe mounting with insulation anchor SHARK® ISO 95

Screw in anchor without pre-drilling

Apply the plaster layer and remove the protective cap after drying

Fill the cavities between the plaster and stud screw with silicone

Screw on the cover rosette

Secure component

Pre-drill the plaster until the insulation layer

Screw the dowels into the pre-drilled hole and remove the protective cap

Fill the cavities between the plaster and stud screw with silicone

Screw on the cover rosette

Secure component
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • For securing guttering down pipes (clamp) in conjunction with pre-assembled stud screw

  • Prior to assembly, regional regulations governing securing guttering down pipes must be checked

  • Readjustment of the pre-assembled screw is not guaranteed for wood fibre insulation materials subject to particular friction (screw cannot be loosened again)

  • It is recommended to process the dowels and screws separately in order to enable re-adjustment in the wood insulation material

Anchor length (l)

95 mm

Drill hole diameter in plaster/cladding sheet metal (d)

28 mm

Included in delivery

PA6 cover rosette, PVC hose 12.0 x 65 mm, stud screw M10 x 120 mm, zinc-plated,

Surface of the screw

Zinc plated

Material

PP GF - Polypropylene glass fiber reinforced

Colour

Anthracite grey RAL 7016

Thread diameter of screw (d thr)

10 mm

Material of screw

Steel

Type description

SHARK ISO

Number of pieces in assortment/set

4 PCS

Embedding depth (h s)

95 mm

Min. temperature resistance

-20 °C

Max. temperature resistance

100 °C

Minimum component thickness (d)

95 mm

Edge clearance (a r)

150 mm

Max. screw-in depth (d a)

70 mm

Resistance against

Aging, Rotting, Weather

Centre-to-centre distance (a)

300 mm

Performance data
Anchor 95
Insulation EPS 032 PU 024 Wood fibre 039 Mineral fibre 035
Recommended loads Frec.1) [kN] 0,09 0,14 0,1 0,06
Axis distance a ≥ [mm] 300
Edge distance c ≥ [mm] 150
Setting depth hs [mm] 95
Dimensions of stud screw dthr. [mm] 10x120/M10 (pre-assembled)
Material screw Zinc-plated steel/stainless steel A2
Nominal drill∅ ddrl. [mm] No pre-drilling in insulation material necessary
Connecting thread attachment part d thr.[mm] M10
Drill hole∅ in plaster layer thicknesses ≤ 4 mm d [mm] No pre-drilling in plaster layer thicknesses ≤ 4 mm necessary
Drilll hole∅ in plaster layer thicknesses 4 mm or facade plate d [mm] 30
1) For Frec. values are defined in the tensile direction
SHARK ISO spiral insulation fixing set Zinc-plated steel including:
SHARK ISO spiral insulation fixing
20 x
SHARK ISO spiral insulation fixing

DWL-(SHARK ISO)-PLA-28X95

Description:
95 mm 28 mm 300 mm
For fastening lightweight fixtures in pressure-resistant ETICS insulating panels. Ideally suited for sustainable wood fibre insulation materials
Quantity: 20 x
Stud screw Zinc-plated steel
20 x
Stud screw Zinc-plated steel

STUDSCR-4.8-WS8/TX25-(A2K)-M10X120

Description:
M10 x 120 mm
With socket head and wrench flat from size M8
Quantity: 20 x
Collar for securing downpipes
20 x
Collar for securing downpipes

COVROS-F.RNWTRPIPMNT-DWL-M10

Description:
PA 6 - Polyamide Light grey
For visually covering the SHARK ISO 95 insulation anchor sets and the AMO-Therm Mini stand-off installation system
Quantity: 20 x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Cemented carbide hole saw for universal use
Cemented carbide hole saw for universal use

SAW-HO-TC-M16-D30MM

x 1 pcs
Centre drill tungsten carbide
Centre drill tungsten carbide

DRL-CENT-HOSAW-TC-D8,0-L120MM

For use with tungsten carbide hole saws and hammer-resistant lightweight core drill bits in masonry
x 1 pcs
Hex. standard mount, size 11 for drills
Hex. standard mount, size 11 for drills

MNT-DRLBIT-HEX-WS11-M16-L90MM

x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details