SHARK Pro plastic multi-purpose anchor

Name: SHARK Pro plastic multi-purpose anchor
Brand: Würth
SKU: 590621476

Plastic multi-purpose anchor Shark Pro
DWL-(SHARK PRO)-PLA-14X76
ZEBRA-SHARK

Art.-no. 590621476

EAN 4056807521305

All versions

Specification

Versatile plastic anchor that knots itself in cavities and expands in solid building materials

Secure hold

Anti-rotation device or twist lock prevents turning in the drill hole

Patented anchor head causes knotting of the anchor shaft when the screw is screwed in

Enables knotting in all cavities and expansion in all solid materials

Quick to install

Low installation torque and high fixed torque

Ideal for pre-positioned and push-through installation

Anchor does not slip deeper due to the collar

The hammer-in stop prevents premature expansion during push-through installation

Robust and versatile

Resistant to rotting, weathering and ageing

UV-resistant for up to six weeks

Made from high-quality polyamide (nylon)

Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

Notice

For installation, we recommend the ASSY-D screw.

Application area

Autoclaved aerated (cellular) concrete

Vertically perforated brick

Plasterboard

Concrete

Hollow calcium silicate block

Drill the hole

Remove drill cuttings from drill hole

Install anchor

Screw in screw until flush

Drill the hole

Install anchor

Screw in screw until flush

Drill the hole

Install anchor

Screw in screw until flush

Application

Application area

Universal plastic anchor

In concrete, solid brick, solid sand-lime block, vertically perforated brick, hollow sand-lime block, autoclaved aerated concrete, gypsum plasterboard, gypsum fibreboard

Suitable for fastening wardrobes, curtain rails, wall shelves, lightweight wall cupboards, picture frames, mirrors, lamps, cable ducts, cable clamps, electrical switches, washbasins, towel rails, information signs, motion detectors etc.

For fastening members in conjunction with a wood or chipboard screw (without drill tip, counter thread, ring thread, e.g. ASSY-D)

Technical information

Anchor diameter	14 mm
Material	PA - Polyamide
Colour	Anthracite
Anchor length (l)	76 mm
Nominal drill-bit diameter (d 0)	14 mm
Drill hole depth (t)	85 mm
Edge clearance (a r)	150 mm
Embedding depth (h s)	75 mm
Min./max. required screw diameter	10-12 mm
Required screw length (l s)	Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter
Type description	SHARK PRO
Min./max. temperature conditions	-40 to 100 °C

Performance data
Anchor diameter [mm]			5	6	8	10	12	14
Recommended loads¹⁾	Concrete ≥ B25; C20/25	F_rec [kN]	0,5	0,9	1,1	1,9	2,4	2,8
	Solid bricks ≥ Mz12; KS12		0,3	0,5	0,7	1,4	1,7	1,7
	Vertically perforated brick ≥ Hlz12²⁾		0,1	0,2	0,2	0,3	0,3	0,4
	Hollow sand-lime bricks ≥ KSL12²⁾		0,2	0,4	0,6	1,0	1,0	1,0
	Aerated concrete PB2; PP2²⁾		0,05	0,1	0,1	0,15	0,2	0,35
	Gypsum plasterboard d = 12.5 mm ²⁾		0,1	0,1	0,1	0,1	0,1	0,1
	Gypsum plasterboard d = 25 mm ²⁾		0,15	0,15	0,15	0,15	0,15	0,15
	Gypsum fibreboard (Fermacell)²⁾		0,2	0,2	0,2	0,25	0,25	0,25

Other installation recommendations:
Edge distance	a_r ≥ [mm]	30	35	40	50	65	80
Screw diameter in panel building materials	d_scr2 [mm]	3	4	4,5	6	8	10
Screw length	l_s [mm]	Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter
¹⁾ These values apply when using wood screws with the largest screw diameter. ²⁾ The drill hole is to be made with a rotary drill (without impacting or hammering).