SMP adhesive sealant, 2-component

Name: SMP adhesive sealant, 2-component
Brand: Würth
SKU: 0893237170

SMP adhesive sealant 2C
STRUCADH-SMP- 2K-195ML

Art.-no. 0893237170

EAN 4062856073801

All versions

Similar products

Prices for customers after login

SMP adhesive sealant, 2-component

Art.-no. 0893237170

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

Fast curing 2-component adhesive sealant for controlled curing regardless of air humidity

Benefits of the 2 components

Very safe due to controlled hardening

Air humidity does not affect the process

Also suitable for large surfaces

Versatile applications and adheres to a wide variety of materials

Good adhesion properties on a variety of surfaces

Compensates for expansions in different materials

Very strong elastic adhesive joints

Not corrosive to metals

Compatible with natural stone

Non-foaming

UV and weather-resistant

Limited chlorine resistance around swimming pools

Max. short-term temperature resistance +200°C

Suitable for subsequent powder coating

Easy to smooth

Can be sanded and painted over once cured

Solvent and silicone-free

Proof of Performance

GEV: Classified as EMICODE class EC2 in accordance with GEV criteria

ILAK, Institut für Lackprüfung: Salt spray test in accordance with DIN EN ISO 9227
Test report no.: 9-5-18/4

Notice

Application times are reduced to around half the time at +30°C and extend to around double the time at +10°C.

The bonded workpieces should not be coated until after the adhesive is fully hardened; if they are coated too early, the formation of bubbles in the coating cannot be ruled out.

The long-term behaviour of bonds between materials with different linear expansion rates must be evaluated, in particular when placed under load in areas with variable temperatures

Bonding metals

No general statement can be made concerning the wettability or bonding ability of anodised surfaces due to the variety, age and potential additional treatments on these adhesive surfaces, such as oils or waxes.

Due to aluminium surfaces and properties being difficult to define, we always recommend that you obtain sufficient information from the supplier to enable you to choose the optimum pre-treatments for your particular bonding application. Sufficient preliminary tests are necessary.

In the production and processing of stainless steel, auxiliary materials such as wax, oils, etc. are frequently used. These materials cannot be simply wiped clean. It has been shown that cleaning with the universal cleaner type 60 (art. no. 0892 130 030, 0892 130 031), grinding or (preferably), sandblasting the surface, followed by repeated cleaning delivers considerably better bonding results.

In principle, zinc-plated sheet metal must always be protected against ongoing ingress of moisture and standing water to prevent "white rust formation". This includes preventing any moisture that arises from coming into contact with the bonding surface

When bonding metals to absorbent materials (e.g. wood, construction materials, etc.), the moisture can be slowly transported through the bonding gap by the absorbent material onto the metal surface, where it can cause corrosion damage to the metal. The metallic bonding surface must therefore have suitable corrosion protection, e.g. paint or powder coating!

Will not reliably adhere to powder coatings that contain PTFE without pre-treatment (e.g. plasma treatment)

SMP adhesive sealant		SMP UNIVERSAL 0893237100 0893237101 0893237102	SMP SPRINT 0893237120 0893237121 0893237122	SMP XTREME 0893237130	SMP HIGH TACK 0893237140	SMP CLEAR 0893237152	SMP METALLIC 0893237160	SMP 2-component 0893237170
Copper	⎷	⎷	⎷²	⎷	⎷	⎷	⎷²
Brass	⎷	⎷	⎷²	⎷	⎷	⎷	⎷²
Steel/iron	⎷	⎷	⎷²	⎷	⎷	⎷	⎷²
Zinc	⎷	⎷	⎷²	⎷	⎷	⎷	⎷²
Plastic	ABS	⎷	⎷	⎷¹	⎷	-	⎷	⎷¹
	GFRP	⎷	⎷	⎷²	⎷	-	⎷	⎷²
	Rubber	-	-	⎷¹	-	-	-	⎷¹
	Hard foams	-	-	⎷	-	-	-	⎷
	Neoprene	-	-	⎷¹	-	⎷	-	⎷¹
	PE/PP	-	-	-	-	-	-	-
	PMMA	-	⎷	⎷¹	-	⎷	-	⎷¹
	Polyamide	-	⎷	⎷²	-	-	-	⎷²
	Polycarbonate	-	⎷	⎷¹	-	⎷	-	⎷¹
	Expandable polystyrene	-	⎷	⎷¹	-	⎷	-	⎷¹
	PTFE	-	-	-	-	-	-	-
	PU	⎷	-	⎷	⎷	⎷	-	⎷
	PVC	⎷	⎷¹	⎷¹	⎷	⎷	-	⎷¹
	Silicones	-	-	-	-	-	-	-
	Polystyrene	-	⎷	⎷	-	⎷	-	⎷
Painted surfaces	Painted surfaces	-	⎷	⎷	-	-	-	⎷
Wood and engineered wood	Decorative panels	⎷	⎷	-	⎷	-	-	-
	Wood, MDF (chipboard)	⎷	⎷	⎷	⎷	⎷	-	⎷
	Cork	-	⎷	⎷	⎷	⎷	-	⎷
	Laminated panels	⎷	⎷	⎷²	⎷	⎷	-	⎷²
Stone and construction materials	Concrete	⎷	⎷	⎷¹	⎷	⎷	⎷	⎷¹
	Bituminous base materials	-	-	-	-	-	-	-
	Aerated concrete, gypsum, gypsum plasterboard	⎷	⎷	⎷¹	⎷	⎷	⎷	⎷¹
	HPL	⎷	⎷	⎷²	⎷	⎷	-	⎷²
	Artificial stone	⎷	⎷	⎷²	⎷	-	⎷	⎷²
	Natural stone	-	⎷	⎷	-	-	-	⎷
	Stone	⎷	⎷	-	⎷	-	⎷	-
	Cement fibreboards	⎷	⎷	⎷¹	⎷	⎷	-	⎷¹
Other	Enamel	⎷	⎷	⎷²	⎷	⎷	⎷	⎷²
	Glass	⎷	⎷	⎷	⎷	⎷	⎷	⎷
	Fibreglass	-	⎷	⎷	-	⎷	-	⎷
	Mirror	-	-	⎷²	⎷	⎷	-	-
	Porcelain, ceramic, tiles	⎷	⎷	⎷²	⎷	⎷	⎷	⎷²
	Paper	-	-	⎷	-	⎷	-	⎷
	Cardboard	-	-	⎷	-	⎷	-	⎷
	Mesh	-	-	-	-	⎷	-	-
	Leather	-	-	⎷	-	⎷	-	⎷
Metal	Aluminium	⎷	⎷	⎷²	⎷	⎷	⎷	⎷²
	Lead	⎷	⎷	⎷²	⎷	⎷	⎷	⎷²
	Stainless steel	⎷	⎷	⎷²	⎷	⎷	⎷	⎷²
	1. Prime with primer for P/W/S (art. no. 0890 100 62) 2. Pre-treat with cleaner type 60 (art. no. 0892 130 030, 0892 130 031) 3. Pre-treat with cleaner type 20 (art. no. 0892 100 11)

Optimisation table
Surface/material	Optimisation steps*	Notes
Anodised aluminium	Universal cleaner type 60	-
Aluminium (AlMg3, AlMgSi1)	1. Clean thoroughly with universal cleaner type 60 2. Sand lightly with "very fine" non-woven abrasive 3. Clean again with universal cleaner type 60	-
Non-ferrous base metals (brass, copper, bronze etc.)		-
Stainless steel (rustproof)		-
Steel (St 235 etc.)		-
Zinc-plated steel (hot-dip or galvanised)		-
Zinc		Formation of white rust when moisture is present
Powder coatings	Primer for P/W/S	Primer for P/W/S must be used!
(PES, EP/PES)	Primer for P/W/S	Primer for P/W/S must be used!
2-component top-coat, water- or solvent-based (PUR, acrylic)	Universal cleaner type 60	Due to the large number of paints available, this information is only a guide. Please perform preliminary tests where necessary.
2-component primers, water- or solvent-based	Universal cleaner type 60
(PUR, acrylic, epoxy resin)	Universal cleaner type 60
Cathodic dip coating	Universal cleaner type 60	-
(E-coating)	Universal cleaner type 60	-
Coil coating	Universal cleaner type 60	-
ABS	Primer for P/W/S	-
GFRP (unsaturated polyester), gelcoat side or SMC	1. Clean thoroughly with universal cleaner type 60 2. Sand with "very fine" or grit 60-80 non-woven abrasive and then vacuum. 3. Clean again with universal cleaner type 60	The adhesive surface must be protected against UV radiation (opaque cover).
Rubber	Primer for P/W/S	-
Polycarbonate	Primer for P/W/S	-
PMMA	Primer for P/W/S	-
Hard PVC, hard PS	Primer for P/W/S	-
Polyamide	Universal cleaner type 60	-
Wood, plywood, MDF, wood products and cork	Dust removal	-
HPL laminated panels (Resopal, Ultrapas)	Universal cleaner type 60	-
Enamel, porcelain, ceramic, tiles	Universal cleaner type 60	Due to the large number of base materials available, this information is only a guide. Please perform preliminary tests where necessary.
Concrete, mineral mortar, plaster and cement fibreboards	Primer for P/W/S	-
Artificial stone (Corian, Varicor)	Universal cleaner type 60	-
* The corresponding sequence of the individual steps must be followed

GEV: Classified as EMICODE class EC2 in accordance with GEV criteria

ILAK, Institut für Lackprüfung: Salt spray test in accordance with DIN EN ISO 9227
Test report no.: 9-5-18/4

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no liability is assumed in relation to the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please refer to the technical data sheet.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

Application area

Suitable for bonding and sealing in vehicle, wagon and container construction, for vehicle structures, the building trade, stair construction, bonding of façades, (cassette) sandwich elements, glass bonding in furniture and display case construction, leaf-enclosing door infills, assembly connections, skirting boards, laminate laying, cable ducts, solar and wind energy systems, sign attachment, equipment and plant construction as well as in various industrial sectors.

Instructions

The application surfaces must be clean, dry and free of grease. For pre-treatment, please refer to the optimisation table in the technical data sheet.

The static mixing tube is screwed onto the opened cartridge and the cartridge is inserted into the cartridge gun 24:1.

Do not use the first 20 g of mixed adhesive for safety reasons.

Then apply the adhesive to one of the two components within the processing time, join the components and fix/press evenly until functional strength is achieved.

After approx. 3.5 hours, you will have achieved a good level of functionality and can continue to use the workpiece.

For more information, please refer to the technical data sheet.

Contents	195 ml
Container	Coaxial cartridge
Chemical basis	Silane modified polymer
Colour	Grey
Density/conditions	1.49 g/cm³ / at 20°C, EN 542
Shore hardness A/conditions	62 / in accordance with DIN 53505
Min./max. processing temperature	7 to 30 °C
Min./max. temperature resistance	-40 to +100 °C
Min. combined tension and shear resistance	2.7 N/mm²
Conditions for combined tension and shear resistance	in accordance with EN 1465
Min. breaking elongation	250 %
Breaking elongation conditions	in accordance with DIN 53504
Shelf life from production/conditions	24 Month / dry storage area, no exposure to direct sunlight, in sealed original containers, 5°C to 25°C
Silicone-free	Yes
Solvent-free	Yes
Isocyanate-free	Yes

Required accessory:

Product

Description

Quantity

Price
/PU

Static mixing tube

STATMIXTUB-ADH-2C-AL1

Art.-no. 0892130015

For 2-component adhesive AL-1

x 15 pcs

Cartridge gun 24:1

MANCLKGGUN-CART-24:1-(UPTO-310ML)

Art.-no. 089131010

Robust and semi-open manual cartridge application gun for highly viscous adhesives and sealants

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additional accessory:

Product

Description

Quantity

Price
/PU