SNAP marker
PLIOSNAP identification rings
MARKER-SNAP-POM-WT(S)-1-1,5SMM-PU300
Register now and access more than 125,000 products
- The SNAP markers are suitable for marking terminal blocks.
- They can be easily slid onto tight cables thanks to assembly parallel to the cable.
- For quick type selection, the bars are marked with different colours.
- The mounting bars are fitted with a mounting shoe, which opens the identification rings, so that the markers can be slid onto the cable with your thumb without damaging them.
- The carrier bars have a base. As a result, they lie horizontally on the workbench and are always to hand.
- The rings surround the cable almost completely without sharp edges and without risk of damaging the conductor sleeve.
- Thanks to a groove and detent, the designation rings lined up on the cable align independently.
Datasheets(X)
Colour | White |
Suitable for cable diameter | 2.6 - 3.5 mm |
Lettering colour | Black |
Suitable for nominal cable cross section | 1 - 1.5 mm² |
Labelling | S |
Material | Polyoxymethylene |
Last viewed
Jacket Planam Canvas 320
Hexagonal nut, low profile with clamping piece (non-metal insert), imperial
Hexagonal bolt
Safety boots, S2
ASSY® 4 COMBI timber screw Steel zinc plated partial thread hexagon head
Flat washer For hexagon head bolts and nuts DIN 125, A4 stainless steel
Protective gloves, winter Ansell Ringers R266
System cabinet workbench 2000 mm with 3 undercounter blocks 8.6
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Work jacket