Safety boots, S2
Safety boots, S2 Steitz Grönland
BOOTS-STEITZ-SZÖNLAND-XB-S2-SZ38
Register now and access more than 125,000 products
OUTSOLE
- Perbunan Alpine ESD, anthracite
- Outsole with 6.5 mm tread
- Very non-slip, even on slippery, wet and oily floors
- High level of cut resistance and mechanical strength
- Wide walking area
- Good resistance to acids and alkalis
- Heat-resistant up to approx. 220°C
CUSHIONING
- SECURA VARIO® heel cushioning
SPECIALS
- Easy-care, silky smooth leather
- Sole flexible at low temperatures down to approx. -25°C
- Closed tongue
- Side zip
- Fitting loop
- Centre lacing
- Woven lambskin lining
- Cold insulating
- Full-length, replaceable ERGO-SOFT ESD comfort footbed liner with additional cushioning and excellent moisture absorption
Datasheets(X)
Colour | Black |
Size | 38 |
Material of shoes upper | Leather |
Safety category | S2 |
Standards | ISO 20345 |
ISO | 20345 |
Foot width | Extra wide |
Material of protective toe cap | Steel |
Last viewed
Tapered pin, unhardened DIN 1 unhardened steel plain, version B (turned)
Stud with head, shape B
Multi-purpose grease II
Protective clothing, disposable
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1 ISO 4017, A2-70 stainless steel, plain, with nut ISO 4032
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head