Safety boots, S2
Safety boots, S2 Steitz Grönland
BOOTS-STEITZ-SZÖNLAND-XB-S2-SZ48/49
Register now and access more than 125,000 products
OUTSOLE
- Perbunan Alpine ESD, anthracite
- Outsole with 6.5 mm tread
- Very non-slip, even on slippery, wet and oily floors
- High level of cut resistance and mechanical strength
- Wide walking area
- Good resistance to acids and alkalis
- Heat-resistant up to approx. 220°C
CUSHIONING
- SECURA VARIO® heel cushioning
SPECIALS
- Easy-care, silky smooth leather
- Sole flexible at low temperatures down to approx. -25°C
- Closed tongue
- Side zip
- Fitting loop
- Centre lacing
- Woven lambskin lining
- Cold insulating
- Full-length, replaceable ERGO-SOFT ESD comfort footbed liner with additional cushioning and excellent moisture absorption
Datasheets(X)
Colour | Black |
Size | 48/49 |
Material of shoes upper | Leather |
Safety category | S2 |
Standards | ISO 20345 |
ISO | 20345 |
Foot width | Extra wide |
Material of protective toe cap | Steel |
Last viewed
Split pin ISO 1234 A2 stainless steel
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Door handle A 900
Short sanding belt Klingspor LS 309 XH
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
ASSY® 4 CSMP ZiNi timber screw Steel zinc-nickel partial thread countersunk milling pocket head
Hexagonal bolt with flange in accordance with MBN standard
CEE plug adapter With phase inverter
Retaining magnet