Safety boots, S3
Safety boots, S3 Steitz Grönland Bau
BOOTS-STEITZ-SZÖNLAND-BAU-XXB-S3-SZ41
Register now and access more than 125,000 products
OUTSOLE
- Perbunan Alpine ESD, anthracite
- Outsole with 6.5 mm tread
- Highly slip-resistant, even on slippery, wet and oily floors
- High cut resistance and mechanical strength
- Wide tread area
- Good resistance to acids and alkalis
- Heat-resistant up to approx. 220°C
SPECIALS
- Easy-care, smooth supple leather
- Sole flexible at low temperatures down to approx. -25 °C
- Closed tongue
- Side zip
- Pull-on loop
- Centre lacing
- Woven lambskin lining
- Cold insulating
- Full-length, replaceable ERGO-SOFT ESD comfort footbed insole with additional cushioning properties and excellent moisture absorption
Datasheets(X)
Colour | Black |
Size | 41 |
Material of shoes upper | Leather |
Safety category | S3 |
Standards | ISO 20345 |
Foot width | Extra extra wide |
Material of protective toe cap | Steel |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, zinc-plated, blue passivated (A2K)
Dungarees
Brass brazing solder no. 95 F
Key, high profile DIN 6885, stainless steel 1.4571, shape A
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank ISO 4014, A2-80 stainless steel, plain
EPS profile thumbturn cylinder
EPS profile double cylinder
Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS
Countersunk rivet