Safety knife Martor SECUMAX POLYCUT 8500012
Safety knife Martor Secumax Polycut 8500012
CUTTER-MARTOR-SECUMAX-POLYCT-8500012.12
Register now and access more than 125,000 products
The SECUMAX POLYCUT is a small, nimble, disposable plastic knife. And yet it is special due to being an all-rounder. The slightly wider gap between the blade and plastic allows you to cut through multiple layers of thin material. You can also make your way through envelopes, paper rolls and layers of film with the long, pointed nose of the knife. The knife also glides through tight spaces due to its very slim design.
Datasheets(X)
Length | 76.1 mm |
Handle width | 3 mm |
Cutting edge length | 3 mm |
Blade length | 0.0 mm |
Material of handle | Plastic |
Last viewed
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Raised countersunk head screw with Z recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Countersunk head screw with hexagon socket ISO 10642, steel, strength class 10.9, zinc flake, silver (ZFSHL)
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Single wire seal (SEAL) For uninsulated cable connector
Protective glove, winter Mapa Temp Ice 700
ASSY®plus VG 4 CH construction screw Steel zinc plated full thread cylinder head
Square wedge-shaped washer DIN 435, A4 stainless steel, for I-section
Slotted countersunk head screw DIN 963, brass, nickel-plated (E2J)