Sanding Blade Roller

Name: Sanding Blade Roller
Brand: Würth
SKU: 0672900150

Flap sanding roller
SNDROLL-FLP-G150-100X100MM

Art.-no. 0672900150

EAN 4011231553575

All versions

Specification

With 6 mm wedge taper and size 19 hole for surface sanding machines.

Medium hardness

Synthetic corundum

Synthetic resin-bound sanding discs

Circumferential speed: Specified by the machine used, but no more than approx. 30 m/s = 3,700 rpm

Notice

General working instructions: At high speeds a coarse grain acts like a finer grain and at low speeds a fine grain acts like a coarser one.

Use tools with a low contact pressure; high contact pressure leads to premature wear.

With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.

Attention: Pay attention to the running direction! Tools are only suitable for clockwise rotation.

Materials to be processed: Forged steel, malleable cast iron, grey cast iron, carbon steel, deep-drawn steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, wood.

For preliminary grinding and powerful structuring. Eliminates scratches, rust, old paint scale, burrs.

Even deep scratches on stainless steel can be eliminated with 40 grain.

Technical information

Diameter x width x drill hole	100 x 100 x 19 mm
Design	With wedge taper 6 mm
Grid size	150
Max. circumferential speed	30 m/s
Material of abrasive medium	Normal corundum